| 注册
首页|期刊导航|纤维素科学与技术|造纸污泥回填纸幅制备瓦楞芯纸的工艺研究

造纸污泥回填纸幅制备瓦楞芯纸的工艺研究

刘艳飞 刘佳伟 夏富成 牛铭龙 彭丽娟 何亮 梁胜 刘玉新

纤维素科学与技术2023,Vol.31Issue(4):33-38,6.
纤维素科学与技术2023,Vol.31Issue(4):33-38,6.DOI:10.16561/j.cnki.xws.2023.04.06

造纸污泥回填纸幅制备瓦楞芯纸的工艺研究

Research on the Technology of Corrugated Core Paper-making from Paper Sludge Backfill

刘艳飞 1刘佳伟 1夏富成 2牛铭龙 2彭丽娟 3何亮 1梁胜 1刘玉新1

作者信息

  • 1. 昆明理工大学 化学工程学院,造纸化工与环保创新团队,云南 昆明 650000
  • 2. 南恩糖纸有限责任公司,云南 新平 653400
  • 3. 云南省烟草质量监督检测站,云南 昆明 650000
  • 折叠

摘要

Abstract

On the basis of not reducing the performance of paper,backfilling the self-produced biochemical sludge from pulp and paper mills into paper can not only realize the resourceful utilization of sludge and reduce the cost of solid waste treatment but also save the amount of calcium carbonate and other fillers used in the formation of paper and reduce the production cost.Based on this,the preparation of corrugated core paper was studied using the discharged biochemical sludge from the pulp mill as fillers and sodium carboxymethyl cellulose as a reinforcing agent.The results showed that the addition of 30%biochemical sludge(relative to the absolute dry pulp)helped to improve the physical properties of corrugated core paper to an extreme,with a tensile index of 22.02,a tear index of 17.86 N•m2/g,ring crush index of 4.38 N•m2/g.In addition,the enhancement effect on the mechanical properties of the core paper was most obvious when the dosage of sodium carboxymethyl cellulose was controlled at 1.6%under 30%sludge backfill.At this time,the tensile index could reach 29.85 N•m2/g,the tear index was 20.41 N•m2/g,and the ring compression index increased to 6.21 N•m2/g.In conclusion,after backfilling with biochemical sludge and internal sizing of CMC,the corrugated core paper obtained under optimal process conditions meets the basic requirements for core strength in corrugated board production and has practical value for promotion.

关键词

造纸污泥/瓦楞芯纸/羧甲基纤维素钠/固废综合利用

Key words

paper mill sludge/corrugated core paper/sodium carboxymethyl cellulose/multipurpose use of solid waste

分类

轻工纺织

引用本文复制引用

刘艳飞,刘佳伟,夏富成,牛铭龙,彭丽娟,何亮,梁胜,刘玉新..造纸污泥回填纸幅制备瓦楞芯纸的工艺研究[J].纤维素科学与技术,2023,31(4):33-38,6.

基金项目

云南省重点研发计划课题(No.202303AC100002-03) (No.202303AC100002-03)

国家自然科学基金(No.22008097、21968014). (No.22008097、21968014)

纤维素科学与技术

1004-8405

访问量0
|
下载量0
段落导航相关论文