| 注册
首页|期刊导航|岩土力学|动静载下全长砂浆锚固玻璃钢锚杆受力及失效特征分析

动静载下全长砂浆锚固玻璃钢锚杆受力及失效特征分析

王文杰 刘超 黄永祥 余龙哲

岩土力学2023,Vol.44Issue(12):3617-3628,12.
岩土力学2023,Vol.44Issue(12):3617-3628,12.DOI:10.16285/j.rsm.2022.1984

动静载下全长砂浆锚固玻璃钢锚杆受力及失效特征分析

Stress and failure characteristics of full-length mortar anchored GFRP bolts under dynamic and static loads

王文杰 1刘超 1黄永祥 2余龙哲1

作者信息

  • 1. 武汉科技大学资源与环境工程学院,湖北武汉 430081||武汉科技大学冶金矿产资源高效利用与造块湖北省重点实验室,湖北武汉 430081
  • 2. 金川集团股份有限公司,甘肃金昌 737100
  • 折叠

摘要

Abstract

In order to study failure problem of glass fiber reinforced plastics(GFRP)bolts under blasting dynamic load,this study establishes a numerical model of full-length mortar anchored GFRP bolt using FLAC3D software.The stress and failure characteristics of the bolt,bolt-mortar interface,and mortar-rock interface under pre-tension static load and blasting dynamic load are investigated,and the influences of dynamic load intensity,surrounding rock strength and mortar strength on bolt stress are analyzed.The reliability of the research results is verified in comparison with the existing experimental results.The results show that the maximum axial stress of GFRP bolt increases linearly with the increase of dynamic load intensity and decreases with the increase of surrounding rock or mortar strength,and the axial stress distribution of GFRP bolt is more concentrated than that of metal bolt.The shear stress of the two interfaces increases rapidly to the peak along the bolt,and then decreases to zero.After that,the interface with relatively weak bonding properties is debonded at first,and the shear stress at the debonding position decreases to the residual bond strength.Meanwhile,the peak shear stress shifts to the bottom of the hole.The shear stress distribution of GFRP bolt is more concentrated than that of metal bolt,and the peak position is more prominent.The greater the dynamic load intensity,the larger the debonding length and shear stress distribution of the failure interface,and the peak position of the shear stress of the undamaged interface will be transferred to the bottom of the hole.The greater the surrounding rock strength or the smaller the mortar strength,the more likely the shear failure occurs at the bolt-mortar interface;on the contrary,it is more likely to occur at the mortar-rock interface.

关键词

全长砂浆锚固/玻璃钢锚杆/爆破动载/界面剪应力/失效特征

Key words

full-length mortar anchorage/GFRP bolts/blasting dynamic load/interface shear stress/failure characteristics

分类

矿业与冶金

引用本文复制引用

王文杰,刘超,黄永祥,余龙哲..动静载下全长砂浆锚固玻璃钢锚杆受力及失效特征分析[J].岩土力学,2023,44(12):3617-3628,12.

基金项目

国家自然科学基金(No.51974206) (No.51974206)

湖北省安全生产专项资金科技项目(No.KJZX202007007).This work was supported by the National Natural Science Foundation of China(51974206)and the Science and Technology of Special Foundation for Safety Production in Hubei Province(KJZX202007007). (No.KJZX202007007)

岩土力学

OA北大核心CSCDCSTPCD

1000-7598

访问量0
|
下载量0
段落导航相关论文