碳纤维增强聚碳酸酯复合材料在高温中的准静态压缩强度OACSTPCD
Quasi-static Compression Strength of Carbon Fiber Reinforced Polycarbonate Composites in high temperature
选择碳纤维平纹织物、碳纤维单向布分别和聚碳酸酯制备热塑性复合材料,包括碳纤维增强聚碳酸酯平纹层合板、单向板和正交层合板,并自制的高温装置与MTS(Material Testing System)搭配使用,研究上述三种复合材料在20℃、120℃、150℃、180℃四种温度下的面外准静态压缩行为,分析结构和温度对性能的影响,探究不同条件下的失效模式.结果表明:碳纤维增强聚碳酸酯平纹层合板的最大应力值和压缩模量与正交层合板接近,均高于碳纤维增强聚碳酸酯…查看全部>>
Thermoplastic composites are prepared by using carbon fiber plain weave fabric and carbon fiber unidirectional fabric in combination with polycarbonate separately.The composites include carbon fiber reinforced polycarbonate plain weave laminate,unidirectional laminate and orthogonal laminate.A self-made high-tempera-ture device is collocated with MTS(Material Testing System)to investigate the out-of-plane quasi-static com-pression behavior of the three compo…查看全部>>
李嘉;刘慧慧;曹文静;顾伯洪;孙宝忠
东华大学 纺织学院,上海 201620东华大学 纺织学院,上海 201620东华大学 纺织学院,上海 201620东华大学 纺织学院,上海 201620东华大学 纺织学院,上海 201620
聚碳酸酯热塑性高温准静态压缩
polycarbonatethermoplastichigh temperaturequasi-static compression
《纺织科学与工程学报》 2024 (1)
三维编织复合材料的动态热力耦合和细观结构设计
34-40,7
国家自然科学基金项目(51675095)
评论