材料工程2024，Vol.52Issue(2)：16-30,15.DOI:10.11868/j.issn.1001-4381.2022.000380
镁合金电弧增材制造研究现状及展望
Research progress and prospect in wire arc additive manufacturing magnesium alloy
摘要
Abstract
Wire arc additive manufacturing(WAAM)has received extensive attention from researchers due to its high deposition rate,high material utilization,low cost,and ability to manufacture large-scale components.It is expected to be widely used in rapid forming of magnesium alloys.The current types and requirements of wires used in WAAM of magnesium alloy were summarized.Then,the current preparation methods suitable for WAAM of magnesium alloy were introduced.The manufacturing technology,deposition mechanism,microstructure and mechanical property of various WAAM-processed magnesium alloys were discussed.Finally,the problems such as the few types of available wires and the uncontrollable shape and property of components for wire arc additive manufacturing of magnesium alloys were analyzed.The optimization of properties and application of components for wire arc additive manufacturing of magnesium alloys were forecasted.关键词
镁合金/丝材制备/电弧增材制造/力学性能Key words
magnesium alloy/wire preparation/wire arc additive manufacturing/mechanical property引用本文复制引用
刘宏杰,刘文才,孙家伟,王茜瑶,邝思羽,吴国华..镁合金电弧增材制造研究现状及展望[J].材料工程,2024,52(2):16-30,15.基金项目
国家自然科学基金(51771115,U2037601) （51771115,U2037601）
洛阳市揭榜挂帅重大科技创新项目(2201029A) （2201029A）
上海交通大学大学生创新实践计划(IPP24086) （IPP24086）
