煤炭与化工2023，Vol.46Issue(12)：78-81,4.DOI:10.19286/j.cnki.cci.2023.12.019
东曲矿主井提升机监控系统的设计及其实现研究
Design and implementation of monitoring system for main shaft hoist in Dongqu Mine
张鹏1
作者信息
- 1. 山西中招招标代理有限公司,山西太原 030000
- 折叠
摘要
Abstract
Intelligent monitoring of mine hoist is an important measure and means to improve the level of coal mine informatization.In this paper,combined with the actual situation of Dongqu Mine,the monitoring system of JKMD-3.5*4 main shaft hoist in the mine is designed and implemented.The system can collect the running state data information of the key parts of the hoist in real time,and can effectively perceive the environmental parameters around the hoist.The system uses Siemens smart 200 series PLC controller.The models of vibration,yaw,temperature and sound sensors are CA-YD-3100,RP6622,PT100 and SV-6005 respectively.The system was applied to the engineering practice of Dongqu Mine.After one year of use,the reliability of the system was verified,and the failure rate of the equipment was reduced by more than 35％.关键词
提升机/监控系统/PLC控制器/设备状态Key words
hoist/monitoring system/PLC controller/equipment status分类
矿业与冶金引用本文复制引用
张鹏..东曲矿主井提升机监控系统的设计及其实现研究[J].煤炭与化工,2023,46(12):78-81,4.
