煤矿安全2024，Vol.55Issue(2)：141-146,6.DOI:10.13347/j.cnki.mkaq.20230151
基于黏聚力模型的螺纹钢锚杆拉拔数值模拟
Numerical Simulation of ribbed steel rebar bolts pull-out based on cohesive model
摘要
Abstract
In order to study the deformation and failure mechanism of ribbed steel rebar bolts anchorage structure,the axisymmetric numerical model of anchorage structure was established by ABAQUS software.Based on the cohesion model,the numerical test was carried out to obtain the distribution and evolution law of bolt deformation,load and anchorage body displacement field during the pull-out process of anchorage structure.The test results show that under the same pull-out displacement,the small rib spacing bolt can also bear higher pull-out load,which indicates that the small rib spacing bolt has stronger bearing capacity for the deformation of surrounding rock of roadway.In the pull-out process of bolt,with the increase of pull-out displacement,the rock mass failure and separation area spread to the deep rock mass in an inverted bowl shape.When the pull-out displacement increases to 9.06 mm,the displacement growth rate at the end of the anchorage section of the rock mass increases,and the maximum displacement of the rock mass is 4.79 mm,which appears at the end of the anchorage section,eventually leading to the failure of the anchorage section matrix.The axial force of the bolt is negatively correlated with the rib spacing of the bolt,and the axial force of the bolt increases with the decrease of the rib spacing.关键词
螺纹钢锚杆/锚固结构/巷道支护/拉拔/数值模拟/黏聚力模型/锚杆支护Key words
ribbed steel rebar bolts/anchorage structure/roadway support/pull out/numerical simulation/cohesive model/anchor bolt support分类
矿业与冶金引用本文复制引用
赵能,唐彬,张大欢,胡阳,王逸洋,谢凯..基于黏聚力模型的螺纹钢锚杆拉拔数值模拟[J].煤矿安全,2024,55(2):141-146,6.基金项目
安徽省自然科学基金面上资助项目(2208085ME118) （2208085ME118）
深部煤矿采动响应与灾害防控国家重点实验室自主课题资助项目(SKLMRDPC20ZZ04) （SKLMRDPC20ZZ04）
安徽高校自然科学研究重大资助项目(KJ2021ZD0049) （KJ2021ZD0049）
