南水北调与水利科技（中英文）2024，Vol.22Issue(1)：175-185,11.DOI:10.13476/j.cnki.nsbdqk.2024.0018
拱坝振动台动力破坏模型试验及其结构动力特性
Experimental testing of arch dam model on shaking table and its structural dynamic characteristics
摘要
Abstract
The dynamic model test of an arch dam on a shaking table is an important way to study its seismic performance and failure mode.A shaking table damage model test of the arch dam was carried out.A model material primarily composed of barite sand,barite powder,and cement was made.The model material had material possesses characteristics of high density,low dynamic elastic modulus,and appropriate strength,with its average density being 3,175 kg/m3,average dynamic elastic modulus being 1.05 GPa and average tensile strength being 68.7 kPa.Combining the conditions provided by the selected shaking table and the mechanical properties of the used model material,the arch dam model was designed with four parts:dam body,foundation,dam shoulder,and boundary wall.The height of the dam body,the maximum width of the dam crest,the thickness of the dam crest,and the thickness at the base of the dam body were 1.5 m,1.0 m,6 cm,and 11 cm,respectively.The total mass of the arch dam model was 2.17 t. Pressure-resistant accelerometers and resistance strain gauges were arranged at different parts and elevations of the arch dam model to obtain dynamic responses.The structural dynamic responses of the model under different earthquake simulation loads were tested.A specific working condition(Time period was 32.0 s)of the arch dam model was selected for analysis,in which the structure began to exhibit evident damage with visible cracks in arch crown and gradually progressed. By analyzing the structural dynamic strain responses under following working condition,the time of the damage occurrence was determined at t =5.8 s,and the condition was divided into four periods.Multiple acceleration response measurement points on the arch crown beam were selected for analysis.The acceleration amplification factors at the acceleration measurement points near the arch crown showed a noticeable and gradually increasing trend in four time periods,consistent with the characteristic of significant cracks appearing in the middle part of the arch crown. The subspace numerical algorithm for modal parameter identification(N4SID method)and the ARX model identification method were introduced.Based on the collected dynamic response measurements,the identification of natural frequencies and damping ratios of the arch dam model structure were conducted for four different periods by the introduced two methods.It was observed that both methods yielded small errors in identifying natural frequencies at each order,while there was a significant difference in the identified damping ratios.This discrepancy was primarily attributed to the high complexity of the damping characteristics of the arch dam structure.Comparing the identified values of natural frequencies and damping ratios at each order for the four time periods,it was found that the natural frequencies gradually decreased with the development of structural damage,while the damping ratios increased with the development of structural damage.The identification results were consistent with the strain response process and the actual damage results of the arch dam model,validating the effectiveness of the dynamic characteristic parameter identification.The results provided a valuable reference for the preparation and analysis of arch dam shaking table tests.Additionally,this study can also serve as validation material for the identification of dynamic characteristic parameters and damage diagnosis methods in arch dam structures.关键词
拱坝/振动台/动力响应/频率/阻尼比Key words
arch dam/shaking table/dynamic response/frequency/damping ratio分类
建筑与水利引用本文复制引用
仇建春,龙长林,郑东健,吴昊,丁跃,张海龙,徐鹏程,陈星巧,袁聪..拱坝振动台动力破坏模型试验及其结构动力特性[J].南水北调与水利科技（中英文）,2024,22(1):175-185,11.基金项目
国家自然科学基金项目(52179128 （）
52079120 （）
51579085) （）
扬州市"绿扬金凤"优秀人才项目(137012705) （137012705）
