控制与信息技术Issue(1)：102-108,7.DOI:10.13889/j.issn.2096-5427.2024.01.014
基于特征匹配的激光雷达和相机外参标定方法
An Extrinsic Calibration Method for LiDAR and Camera Based on Feature Matching
陈美林 1蒋国涛 1皮志超 1贺谦 1谭斌 1罗朔 1阳海浪1
作者信息
- 1. 中车株洲电力机车研究所有限公司,湖南 株洲 412001
- 折叠
摘要
Abstract
The onboard sensor information of intelligent driving systems primarily fuses LiDAR and camera data.Accurate and stable extrinsic parameter calibrations offer the basis of effective multi-source information fusion.In order to improve the robustness of the perception system,this paper proposes an extrinsic calibration method for LiDAR and cameras based on feature matching.Firstly,a point cloud data sphere center algorithm and image data ellipse algorithm were proposed to extract point cloud three-dimensional coordinates and pixel two-dimensional coordinates of feature points.Next,the constraint of feature point pairs was established in the LiDAR and camera coordinate systems to construct a nonlinear optimization algorithm.Finally,this nonlinear optimization algorithm was used to optimize the extrinsic parameters of the LiDAR and cameras.Evaluation of the projected LiDAR point cloud onto the image based on the optimized extrinsic parameters yielded transverse and vertical average errors of 3.06 pixels and 1.19 pixels,respectively,in the LiDAR and camera joint calibration.The method proposed in the article reduces the average projection error by 40.8%and the error variance by 56.4%compared to the livox_camera_lidar_calibration method.Its accuracy and robustness are significantly better than the latter.关键词
激光雷达/相机/外参数标定/特征匹配Key words
light detection and ranging(LiDAR)/camera/extrinsic parameter calibration/feature matching分类
机械制造引用本文复制引用
陈美林,蒋国涛,皮志超,贺谦,谭斌,罗朔,阳海浪..基于特征匹配的激光雷达和相机外参标定方法[J].控制与信息技术,2024,(1):102-108,7.
