重型机械Issue(1)：99-105,7.
300t转炉悬挂系统应力测试与分析
Force testing and analysis of the 300 t converter suspension system
史良 1王和兵 1王劲 1常露锋 1王景娟1
作者信息
- 1. 首钢京唐钢铁联合有限责任公司, 河北 唐山 063200
- 折叠
摘要
Abstract
For large converters,domestic design and manufacturing are currently available.The connection between the ring and the shell is the key in the design.After comprehensive evaluation,The 300 ton converter at a certain steel plant adopted an 8-point spring plate connection.During the design process,although the finite element method was used to simulate and analyze the stress-strain state of the spring plate,and the theoretical service life and safety of the connecting structure were calculated and predicted,the stress state of the spring plate in the actual production process is often disturbed by static uncertainty and corner stress sets.It is necessary to obtain on-site measured data to verify and correct the calculation process.This article establishes a stress testing model for the suspension system of the 300 ton converter,and conducts stress tests on the spring plate under two working conditions:empty furnace and full load.The load conditions of the spring plate at each point under different working conditions are obtained,and the stress distribution status of the spring plate is analyzed.The results can provide reference and practical significance for the design of the converter suspension system.关键词
转炉/悬挂系统/弹簧板Key words
converter/suspension system/spring plate分类
矿业与冶金引用本文复制引用
史良,王和兵,王劲,常露锋,王景娟..300t转炉悬挂系统应力测试与分析[J].重型机械,2024,(1):99-105,7.
