| 注册
首页|期刊导航|铜业工程|QAl10-4-4/TC6双金属连接界面组织与力学性能分析

QAl10-4-4/TC6双金属连接界面组织与力学性能分析

姜琪 孙利星 张艺豪 张容焱 倪磊 杨倩 邹军涛

铜业工程Issue(1):45-53,9.
铜业工程Issue(1):45-53,9.DOI:10.3969/j.issn.1009-3842.2024.01.005

QAl10-4-4/TC6双金属连接界面组织与力学性能分析

Analysis of Bonding Interfacial Microstructure and Mechanical Properties of QAl10-4-4/TC6 Bimetal

姜琪 1孙利星 1张艺豪 1张容焱 1倪磊 2杨倩 3邹军涛1

作者信息

  • 1. 西安理工大学材料科学与工程学院陕西省金属基异质材料先进制造技术工程研究中心, 陕西 西安 710048
  • 2. 株洲钻石切削刀具股份有限公司, 湖南 株洲 412000
  • 3. 西安比亚迪汽车有限公司, 陕西 西安 710119
  • 折叠

摘要

Abstract

Copper alloy/titanium alloy bimetallic materials can leverage their respective performance advantages,which possess excel-lent properties such as lightweight,wear-resistant and high-strength.This article bonded QAl10-4-4 aluminum bronze and TC6 titani-um alloy of vacuum hot press diffusion bonding,studied the interfacial microstructure and mechanical properties of QAl10-4-4/TC6 bi-metals that directly bonded and bonded with AgCuZnCd through microstructural observation and shear strength test,and explored the influence law of bond parameters and intermediate layers on QAl10-4-4/TC6 bimetallic bond quality,then analyzed the formation mech-anism of the bimetallic interface transition layer.At last,this paper established internal correlation between bonding process-interface microstructure-mechanical properties.The results showed that the quality of QAl10-4-4/TC6 bimetallic with direct diffusion bonding was poor.Intermetallic led to the growth of through long cracks at the interface and the interface shear strength was only 21 MPa.Inter-metallic reduced after bonding QAl10-4-4/TC6 bimetal with AgCuZnCd.The maximum interface shear strength was 177.9 MPa at 850℃.The residual internal stress and cracks between interfaces increased as the temperature exceeded 835℃,as a result,the bime-tallic interface strength decreased rapidly.The strength of the bimetallic interface decreased rapidly as the temperature exceeded 850℃.

关键词

铜合金/钛合金/真空热压扩散连接/中间层/金属间化合物/剪切强度

Key words

copper alloy/titanium alloy/vacuum hot press diffusion bonding/intermediate layer/intermetallic/shear strength

分类

矿业与冶金

引用本文复制引用

姜琪,孙利星,张艺豪,张容焱,倪磊,杨倩,邹军涛..QAl10-4-4/TC6双金属连接界面组织与力学性能分析[J].铜业工程,2024,(1):45-53,9.

基金项目

国家自然科学基金青年项目(52104385) (52104385)

陕西省重点研发三项改革项目(2023GXLH-037) (2023GXLH-037)

陕西省教育厅重点科研计划协同创新中心项目(21JY030) (21JY030)

西安市科协青年人才托举计划项目(095920221357)资助 (095920221357)

铜业工程

1009-3842

访问量5
|
下载量0
段落导航相关论文