机械科学与技术2024，Vol.43Issue(3)：466-473,8.DOI:10.13433/j.cnki.1003-8728.20220277
7075铝合金喷丸参数影响的数值仿真及实验研究
Numerical Simulation and Experimental Study on Influence of Shot Peening Parameters of 7075 Aluminum Alloy
摘要
Abstract
In order to explore the influence of the different shot peening parameters on the shot peening results in the shot peening process of 7075 aluminum alloy,the corresponding shot peening process is simulated via ABAQUS software,and the effects of the different shot peening parameters on the surface residual stress distribution,surface roughness and surface three-dimensional morphology are observed.At the same time,the corresponding shot peening process is studied based on the experimental process,by comparing the simulation and experimental results,it is finally found that although there is a certain gap between the two in specific values,the two show obvious consistency in change trend.Therefore,it can be considered that the analysis results of the two are more reliable.At the same time,it is concluded that under the condition of simply adjusting the projectile size and velocity,it is difficult to give consideration to both the surface residual stress and the surface roughness at the same time,but the improvement of shot peening coverage can better take these two aspects into account at the cost of reducing production efficiency.关键词
7075铝合金/喷丸/残余应力/粗糙度/有限元Key words
7075 aluminum alloy/shot peening/residual stress/roughness/finite element分类
矿业与冶金引用本文复制引用
汪东明,单以才,孟龙晖..7075铝合金喷丸参数影响的数值仿真及实验研究[J].机械科学与技术,2024,43(3):466-473,8.基金项目
江苏省青年基金项目(BK20190676)与江苏省高校自然科学基金项目(19KJB460019) （BK20190676）
