锅炉技术2024，Vol.55Issue(2)：53-59,7.
350MW超临界机组高温再热蒸汽管道下沉原因分析及治理
Cause Analysis and Treatment of High Temperature Reheat Steam Pipe Sinking in 350 MW Supercritical Unit
摘要
Abstract
After a period of operation,a large range of subsidence was found in the boiler side branches of high temperature reheat steam pipe of a 350 MW supercritical unit.Most pointers of continuously arranged constant spring hangers were beyond the lower limit position.Combined with field inspection and measurement,the stress calculation and analysis of pipeline under multiple working conditions were carried out.The results show that:The abnormal X-angular displacement and Z-linear displacement at the port of the outlet header are the main reasons for the pipe sinking,which are caused by the deformation and uneven deformation of the tube panel of the high temperature reheater with wing wall structure of the circulating fluidized bed boiler in this unit.The load deviation degree and constant degree of constant hangers exceed the limit is the secondary reasons for the pipeline subsidence.On the premise of not replacing the deformed heating surface tube panel,the working state of the pipeline and the support hangers are improved by making full use of pipeline flexibility to develop treatment scheme,and the stress level of the piping system is optimized.At the same time,the solutions to the problems of tube panel deformation and pipe subsidence in the later stage are put forward.The research provides reference for the design,maintenance and displacement anomaly troubleshooting of pipelines of similar units.关键词
管道下沉/应力分析/循环流化床锅炉/翼形墙/变形Key words
pipeline subsidence/stress analysis/circulating fluidized bed boiler/wing wall/deformation分类
能源科技引用本文复制引用
林庆宇,李勇军,黄庆华,李志刚,角加艺,沈雁逍..350MW超临界机组高温再热蒸汽管道下沉原因分析及治理[J].锅炉技术,2024,55(2):53-59,7.基金项目
广西壮族自治区市场监督管理局科技计划项目(GXSJKJ2022-4) （GXSJKJ2022-4）
