金属加工（热加工）Issue(4)：89-95,7.
电弧熔炼Fe-V合金的凝固组织与转变规律研究
Study on solidification structure and transformation law of Fe-V alloy melted by arc melting
刘烁 1贾旭 1陈树海 1余腾义 2周磊磊2
作者信息
- 1. 北京科技大学材料科学与工程学院 北京 100083
- 2. 攀钢集团攀枝花钢铁研究院有限公司 四川攀枝花 617000
- 折叠
摘要
Abstract
Fe-V alloy materials with different compositions were prepared by arc-melting,and their microstructure and mechanical properties under as cast and heat treatment conditions were characterized and analyzed using scanning electron microscopy,backscattering electron microscopy,hardness testing,etc.The results indicate that there are a total of three phases in the cast structure of Fe-V alloy:matrix solid solution α Phase,metastable phase α'Phase,as well as brittle and hard phases σ Phase.Slow heating and quenching can cause internal and generated σ Phase growth causes separation from the matrix α'Phase dissolution occurs;Rapid heating and quenching,the internal structure of Fe-V alloy has already formed σ The phase has not grown significantly,but has also become small.The hardness of the Fe-V alloy with rich iron under quenching conditions is lower than that of the as-cast structure,while the hardness of the alloy with rich vanadium increases.关键词
电弧熔炼/Fe-V合金/凝固组织/淬火组织/显微硬度Key words
arc-melting/Fe-V alloy/solidified structure/quenched structure/microhardness引用本文复制引用
刘烁,贾旭,陈树海,余腾义,周磊磊..电弧熔炼Fe-V合金的凝固组织与转变规律研究[J].金属加工（热加工）,2024,(4):89-95,7.
