基于磁集成设计的超高频谐振反激变换器研究OA北大核心CSTPCD
Research on very high frequency resonant flyback converter based on integrated magnetic design
研究了一种基于磁集成设计的超高频谐振反激功率变换器,通过充分利用电路中的寄生参数,减小了电路中无源器件的数量,从而进一步提升变换器的功率密度.采用空心PCB电感构建松耦合变压器,利用其漏感作为谐振电感、功率管寄生电容作为谐振电容构建谐振网络.通过合理设计变压器电学参数,保证了功率器件软开关的实现.然后,基于Wheeler公式对空心变压器的几何结构进行估算.进一步地,基于有限元仿真对空芯变压器的结构进行调整,结合设计目标实现了空心变压器的精确设计.最后搭建了 30 MHz,25W的超高频谐振反激变换器样机.额定功率下,样机达到了 80.5％的效率和5.5 W/cm3的功率密度,验证了以上方法的有效性.
A VHF resonant flyback power converter based on integrated magnetic design was studied.By taking advantages of parasitic parameters in the circuit,total passive components count was reduced which further improves the power density.Firstly,a loosely coupled transformer was constructed with air-core PCB inductors.The leakage inductance of the transformer was used as the resonant inductor and the parasitic capacitance of the power switch was used as the resonant capacitor.By properly designing transformer electrical parameters,zero-voltage-switching(ZVS)of the power switch was achieved.Then,the initial transformer geometric structure was calculated with improved Wheeler formula.Furthermore,the transformer geometric structure was adjusted based on finite element simulations,so that to achieve the desired electrical parameters.Finally,a 30 MHz,25 W prototype was built.At rated power,the prototype achieves 80.5％efficiency and 5.5 W/cm3 power density,which verifies above method.
张德生;张明;宋伟;闵闰
华中科技大学集成电路学院,湖北武汉 430074北京空间飞行器总体设计部,北京 100094
计算机与自动化
谐振反激变换器超高频空心变压器寄生参数有限元仿真
flyback convertervery high frequencyair core transformerparasitic parametersfinite element simulation
《华中科技大学学报（自然科学版）》 2024 (003)
1-6 / 6
国家自然科学基金资助项目(62074067);工信部项目资金资助项目.
评论