|国家科技期刊平台
首页|期刊导航|电子学报|加载超表面的宽带低剖面双极化交叉偶极子天线

加载超表面的宽带低剖面双极化交叉偶极子天线OA北大核心CSTPCD

Broadband Low-Profile Dual-Polarized Crossed-Dipole Antenna Loaded with Metasurface

中文摘要英文摘要

该文提出了一种加载超表面(MetaSurface,MS)的宽带低剖面双极化交叉偶极子天线.天线由三部分结构组成:1对交叉偶极子、4个寄生贴片和超表面结构.交叉偶极子用于实现天线的双极化特性.通过在交叉偶极子上方加载寄生贴片和在偶极子臂处开槽,扩展了天线的阻抗带宽.同时将交叉偶极子下方的金属反射板替换为超表面,实现了天线的低剖面.为了提高馈电端口间的隔离度,引入了4个金属短路柱.仿真和测试结果表明,天线|S11|<-10 dB的阻抗带宽为42.5%(2.26~3.48 GHz),在带宽范围内端口隔离度和交叉极化分别大于21 dB和小于-31 dB,天线的整体尺寸只有0.5λ0´0.5λ0´0.074λ0(λ0为工作频率2.9 GHz时对应的自由空间的波长).

In this paper,a broadband low-profile dual-polarized cross-dipole antenna loaded with a metasurface(MS)is proposed.The antenna is consisted of three parts:a pair of crossed dipoles,four parasitic patches,and a metasurface structure.The crossed dipoles are used to achieve dual-polarization characteristics of the antenna.By loading parasitic patches above the dipoles and slotting the dipole arms,the impedance bandwidth of the antenna is extended,and the low profile of the antenna is achieved by replacing the metal reflector below the dipole with a metasurface.In order to improve the isolation between the input ports,four metal shorting columns are introduced.The simulation and measured results show that the impedance bandwidth of |S11|<-10 dB is 42.5%(2.26~3.48 GHz),and the port isolation and cross-polariza-tion within the bandwidth range are greater than 21 dB and below-31 dB,respectively.The size is only 0.5λ0´0.5λ0´ 0.074λ0(λ0 is the wavelength of free space corresponding to the operating frequency of 2.9 GHz).

黄文;王冲;周贤超;宋赟;虢占坤;任仪

重庆邮电大学光电工程学院,重庆 400065

电子信息工程

双极化超表面寄生贴片低剖面宽带

dual-polarizationmetasurfaceparasitic patcheslow-profilebroadband

《电子学报》 2024 (002)

油气电磁法勘探中的多尺度目标精确正演方法研究

477-485 / 9

国家自然科学基金(No.61871063) National Natural Science Foundation of China(No.61871063)

10.12263/DZXB.20220840

评论