| 注册
首页|期刊导航|材料工程|ZrO2增强聚合物先驱体SiCNO复合陶瓷的制备和力学性能

ZrO2增强聚合物先驱体SiCNO复合陶瓷的制备和力学性能

费轩 余煜玺 严远高 魏永金 赵刚 黄柳英

材料工程2024,Vol.52Issue(4):34-42,9.
材料工程2024,Vol.52Issue(4):34-42,9.DOI:10.11868/j.issn.1001-4381.2023.000188

ZrO2增强聚合物先驱体SiCNO复合陶瓷的制备和力学性能

Preparation and mechanical properties of ZrO2-reinforced polymer-derived SiCNO composite ceramics

费轩 1余煜玺 1严远高 1魏永金 1赵刚 1黄柳英1

作者信息

  • 1. 厦门大学 材料学院 福建省特种先进材料重点实验室,福建 厦门 361005
  • 折叠

摘要

Abstract

Polymer derived ceramics(PDCs)technology has the advantages of simple manufacturing and adjustable composition,providing an effective way to prepare new types of ceramics.However,due to the escape of tiny molecules during the pyrolysis process,the pore defects are formed,and amorphous polymer derived SiCNO ceramics(PDCs SiCNO ceramics)produced by precursor technique have poor mechanical properties.To solve the aforementioned problems,enhancement of the polymer-derived ceramics is achieved by adding a second phase(particles reinforcement)to the ceramic matrix.A method was proposed to obtain ZrO2 reinforced PDCs-SiCNO composite ceramics(PDCs-SiCNO-ZrO2)by ball-milling of polyvinylsilazane(PVSZ)and ZrO2 followed by pyrolyzing.The phase structure and mechanical properties of PDCs-SiCNO-ZrO2 composite ceramics were investigated,respectively.The results show that the introduced ZrO2 fillers are embedded in the matrix of PDCs-SiCNO ceramic as a reinforcement,which not only can effectively reduce the linear shrinkage,but also greatly enhance the mechanical properties of the PDCs-SiCNO-ZrO2 composite ceramics.PDCs-SiCNO-ZrO2 composite ceramics with a 10%(mass fraction)ZrO2 addition have the flexural and compressive strengths of 197.03 MPa and 375.2 MPa,which are 64%and 267%greater than those of PDCs-SiCNO ceramics.The highest hardness value can reach 20.92 GPa,and the fracture toughness can reach 2.76 MPa·m1/2.The addition of appropriate content of ZrO2 contributes to the densification of the PDCs-SiCNO ceramic matrix,which enhances the mechanical properties of the PDCs-SiCNO-ZrO2 composite ceramics.

关键词

聚合物先驱体陶瓷/二氧化锆/复合陶瓷/力学性能

Key words

polymer-derived ceramic/zirconia/composite ceramic/mechanical property

分类

通用工业技术

引用本文复制引用

费轩,余煜玺,严远高,魏永金,赵刚,黄柳英..ZrO2增强聚合物先驱体SiCNO复合陶瓷的制备和力学性能[J].材料工程,2024,52(4):34-42,9.

基金项目

福建省自然科学基金(2022J01041) (2022J01041)

国家自然科学基金(51675452) (51675452)

材料工程

OA北大核心CSTPCD

1001-4381

访问量0
|
下载量0
段落导航相关论文