FeAl-316SS接头的反应行为、显微组织与力学性能OA北大核心CSTPCD
Reaction behavior,microstructure,and mechanical properties of FeAl-316 stainless steel joints
采用热爆反应与粉末冶金相结合的工艺实现了FeAl金属间化合物与 316不锈钢(316SS)的有效连接,研究了连接温度(700、800、900℃)对界面成分组成和力学性能的影响.结果表明,当加热到 637℃时,FeAl反应层温度瞬间升高到1050℃,发生明显的热爆反应,并伴随持续约 15s的剧烈放热.随着温度从 700℃提高到 900℃,界面由 Fe-316SS、316SS(Al)交替组成的形式转变为由FeAl-316SS(Al)-316SS组成.…查看全部>>
The effective joining between the FeAl intermetallic compounds and the 316 stainless steels was realized by the combination of thermal explosion reaction and powder metallurgy.The effect of joining temperature(700,800,900℃)on the interface composition and mechanical properties were studied.The results show that,the temperature of FeAl reaction layer rises to 1050℃instantaneously when it is heated to 637℃,and the obvious thermal explosion reaction occur…查看全部>>
蔡小平;尹进南;张志鹏;冯培忠
中国矿业大学材料与物理学院,徐州 221116中国人民解放军空军 93147 部队,成都 610000中国矿业大学材料与物理学院,徐州 221116中国矿业大学材料与物理学院,徐州 221116
冶金工业
铁铝金属间化合物316不锈钢粉末冶金异种材料连接力学性能
FeAl intermetallics316 stainless steelspowder metallurgydissimilar joiningmechanical properties
《粉末冶金技术》 2024 (2)
107-114,8
国家自然科学基金资助项目(51611130064)
评论