机械科学与技术2024，Vol.43Issue(4)：698-703,6.DOI:10.13433/j.cnki.1003-8728.20220247
功率六分支人字齿轮传动系统的配齿方法
Gear Teeth Matching Method of Power Six-branch Herringbone Gear Transmission System
刘琳琳 1王三民 1何前进 1赵永进 1任鸿飞1
作者信息
- 1. 西北工业大学 机电学院,西安 710072
- 折叠
摘要
Abstract
Power shunt transmission system has been widely used in high-power transmission due to its advantages of strong bearing capacity,large transmission ratio,and compact structure.When each branch gear is fitted,the adjacency condition and transmission ratio condition are considered,and the collision between the gears is avoided,and the interference caused by each pair of gear meshing has become one of the key problems to be considered in the design of the system.Based on the six-branches coaxial transmission power configuration in this paper,a judgment condition is proposed which is easier to determine whether four gear mesh produce interference;and combined with modified gear,they established the teeth matching method of six-branch herringbone gear,which not only can quickly calculate the displacement coefficient of gear mesh not to produce interference,but also obtain the multi-group schemes satisfying transmission ratio and interference error requirements.The calculation results show that the gear design parameters obtained by this method meet all the requirements,which provides a practical method and theoretical basis for the design of a six-branch herringbone gear transmission system in a ship power system.关键词
齿轮传动系统/功率六分支/齿轮干涉条件/配齿/变位系数Key words
gear transmission system/power six branches/gear interference condition/gear matching/displacement coefficient分类
机械制造引用本文复制引用
刘琳琳,王三民,何前进,赵永进,任鸿飞..功率六分支人字齿轮传动系统的配齿方法[J].机械科学与技术,2024,43(4):698-703,6.
