机械与电子2024，Vol.42Issue(4)：39-44,6.
虚拟PLC驱动的生产线调试系统设计
Design of Debugging System for Production Line Driven by Virtual PLC
摘要
Abstract
In response to the current low efficiency and low level of intelligence in production line de-bugging,a virtual debugging scheme driven by virtual PLC software in the loop is proposed.Firstly,by modeling and assembling the production line,the electromechanical concept design is carried out in the MCD module of NX software.Secondly,the PLC program is written using TIA Portal software.Finally,the virtual simulation PLC is enabled through PLCSIM Advanced,and connected to the MCD through signal mapping to complete the virtual debugging system construction.This system does not require any physical equipment,only one PC is needed to complete the debugging of the production line,simulating the status of each workstation during the operation of the production line.After verification,this solution can effectively complete the virtual debugging task of the production line and obtain equipment operation data.At the same time,a conceptual model for virtual debugging of production lines is proposed,providing a reference for the establishment of virtual debugging systems for production lines and the construction of digital twins for production lines.关键词
PLC/MCD/生产线/虚拟调试Key words
PLC/MCD/production line/virtual debugging分类
信息技术与安全科学引用本文复制引用
张耀武,刘宇,马付建,尹剑,杨大鹏..虚拟PLC驱动的生产线调试系统设计[J].机械与电子,2024,42(4):39-44,6.基金项目
辽宁省教育厅科学研究项目(LJKMZ20220843) （LJKMZ20220843）
辽宁省交通运输厅交通科技项目(202117) （202117）
