河南理工大学学报（自然科学版）2024，Vol.43Issue(2)：41-48,8.DOI:10.16186/j.cnki.1673-9787.2022020007
矿石破碎颗粒黏结模型黏结键特征及表征
The characteristics and representation of bond key in bonded particle model for ore crushing
摘要
Abstract
Objectives Aimed at addressing the inaccuracy of simulation owing to the difference between the ore bonded particle model and the actual ore crushing feature,the characteristics of bond key in the bonded particle model of different size were emphasized.Methods According to the theory of ore strength size ef-fect,the bond parameters between basic particles in the bonded particle model of copper ore were designed.As for three sizes of copper ore samples including 60 mm,40 mm and 30 mm,the drop weight test and crushing simulation by discrete element method were carried out.The concept of equivalent critical deforma-tion of bond was given.The relationship between t10 from drop weight test and impact energy was discussed.The variation rule of bond parameters was explored.Results The results show that the average errors of mass percentage from crushing simulation and drop weight test of three kinds of size copper ore are 1.75%,1.66%and 1.84%,respectively.The crushing mass percentage obtained by test and simulation are in good agreement.The bond strength can be characterized by normal and shear equivalent critical deformation.The tn10 of unit impact energy from drop weight test can characterize the ore strength.Conclusions The bond pa-rameters are determined by the corresponding relationship between the equivalent critical deformation of the bond and the tn10,which improves the modeling efficiency and simulation accuracy of the ore bonded par-ticle model.关键词
颗粒黏结模型/黏结键/等效临界变形/离散元/矿石破碎Key words
bonded particle model/bond key/equivalent critical deformation/discrete element method/ore crushing分类
矿业与冶金引用本文复制引用
王晓,薛玉君,程波,刘俊,李济顺..矿石破碎颗粒黏结模型黏结键特征及表征[J].河南理工大学学报（自然科学版）,2024,43(2):41-48,8.基金项目
国家重点基础研究发展规划项目(2012CB724306) （2012CB724306）
郑洛新国家自创区创新引领型产业集群专项项目(201200210500) （201200210500）
