河南理工大学学报（自然科学版）2024，Vol.43Issue(2)：77-87,11.DOI:10.16186/j.cnki.1673-9787.2021110123
工程地质三维岩性网格模型体绘制的边界平滑方法
Boundary smoothing for volume rendering of 3D lithology grid model in engineering geology
摘要
Abstract
Objectives In order to solve the sawtooth problem caused by the discontinuous transition of litho-logic attribute at the boundary of rock strata in the volume rendering process of 3D lithology grid model in engineering geology,Methods a boundary linear smoothing method of 3D lithology grid model subdivision is proposed.According to the characteristics of horizontal continuity of rock strata and the rationality of spa-tial superposition relationship in vertical direction,and drawing on the idea of connecting adjacent borehole rock formations to the geological interfaces,the lithologic grid is organized into a form of regular division in horizontal direction and vertical recording of top and bottom elevation values of rock segments.Similar to a regularly distributed virtual hole(called a vertical column pillar).Based on this kind of organization form,in the process of light projection,four strata formation around the sampling point are used to form attribute cal-culation units,and define the strata connection rules and 16 subdivision templates.Linear calculation of lithological properties at any point in the model space is realized.Results Through the implementation and verification of WebGL2.0 in GPU,it is concluded that the rock vertical boundary on the longitudinal direc-tion can be significantly smoothed,which solves the sawtooth problem in volume drawing of rock boundaries.Finally,the calculation of the lithologic attribute at the sampling point is realized and the effect after smoothing is obtained.Conclusions The results show that the characteristics of the rock strata are combined with the spatial sampling process of the volume drawing ray projection algorithm,and the smoothing effect is good for the engineering geological rock strata with the assumption of horizontal continuity,and provide a new idea for the visualization of lithology grid in engineering geology.However,because there is no clear se-quence relationship between rock strata,the belt fault model cannot be processed,nor can the transverse dis-connection of large dip rock strata be dealt with.关键词
三维岩性网格/光线投射/锯齿/体绘制/平滑Key words
3D lithology grid/ray casting/aliasing problem/volume rendering/smooth分类
信息技术与安全科学引用本文复制引用
周英,牛露佳,王占刚,张曦,许钊上..工程地质三维岩性网格模型体绘制的边界平滑方法[J].河南理工大学学报（自然科学版）,2024,43(2):77-87,11.基金项目
国家自然科学基金资助项目(41672326) （41672326）
