| 注册
首页|期刊导航|内燃机工程|基于燃烧状态反馈的柴油机低温冷起动逐循环控制研究

基于燃烧状态反馈的柴油机低温冷起动逐循环控制研究

秦彪 王捧 马士宝 王国莹 石磊 邓康耀

内燃机工程2024,Vol.45Issue(2):26-33,8.
内燃机工程2024,Vol.45Issue(2):26-33,8.DOI:10.13949/j.cnki.nrjgc.2024.02.004

基于燃烧状态反馈的柴油机低温冷起动逐循环控制研究

Research on Cycle-by-Cycle Diesel Engine Control of Low Temperature Cold Start Based on Combustion State Feedback

秦彪 1王捧 1马士宝 2王国莹 3石磊 1邓康耀1

作者信息

  • 1. 上海交通大学 动力机械及工程教育部重点实验室,上海 200240
  • 2. 上海船舶设备研究所,上海 200031
  • 3. 中国北方发动机研究所,天津 300300
  • 折叠

摘要

Abstract

In order to improve the poor combustion cycle of low-temperature cold starting conditions,a combustion status feedback system was developed by CompactRIO controller.The cylinder pressure acquisition and real-time calculation and feedback of combustion state parameters were achieved.The influences of injection timing on CA50(the crank angle corresponding to the cumulative heat release in the cylinder reaches 50%)at different temperatures and speeds were researched by experiments.The cycle-by-cycle control method of injection timing based on the feedback of combustion state was proposed,achieving the matching of combustion parameters and control parameters.After the control method was adopted,the CA50 was more concentrated in the efficient combustion zone,the maximum combustion pressure was higher and the bad combustion cycle was improved.And the starting time was reduced by 36%on average,which effectively improved the performance of low temperature cold starting of the diesel engine.

关键词

低温冷起动/逐循环控制/喷油时刻/柴油机

Key words

low temperature cold start/cycle-by-cycle control/injection timing/diesel engine

分类

能源科技

引用本文复制引用

秦彪,王捧,马士宝,王国莹,石磊,邓康耀..基于燃烧状态反馈的柴油机低温冷起动逐循环控制研究[J].内燃机工程,2024,45(2):26-33,8.

内燃机工程

OA北大核心CSTPCD

1000-0925

访问量4
|
下载量0
段落导航相关论文