|国家科技期刊平台
首页|期刊导航|科技创新与应用|某航空密封件波形弹簧模态分析

某航空密封件波形弹簧模态分析OA

中文摘要英文摘要

该项目以0Cr17Ni7Al不锈钢波形弹簧为研究对象,利用CATIA软件进行建模并导入ABAQUS软件中进行有限元分析,获得其 0~12 阶模态特性.基于实际压缩高度分析受力情况的波形弹簧自振频率,并对 2 种自由态以及工作状态的弹簧仿真结果进行对比,得到固有频率的数据以及振形图.为不同情况下弹簧种类的选择提供一定参考.

In this project,the waveform spring of 0Cr17Ni7Al stainless steel is taken as the research object,which is modeled by CATIA software and imported into Abaqus software for finite element analysis,and its 0~12-order modal characteristics are obtained.Based on the actual compression height,the natural frequency of the waveform spring is analyzed,and the spring simulation results of two free states and working states are compared,and the data of natural frequency and vibration pattern are obtained.The purpose of this paper is to provide some reference for the selection of spring types under different conditions.

袁红彬;田井文;陈康文

中国航发长江动力有限公司,湖南 岳阳 414100

机械工程

不锈钢波形弹簧模态自由态约束态有限元分析

stainless steelwaveform springmodefree stateconstrained statefinite element analysis

《科技创新与应用》 2024 (012)

11-15 / 5

江西省教育厅科技厅项目(GJJ190531)

10.19981/j.CN23-1581/G3.2024.12.003

评论