西安工程大学学报2024，Vol.38Issue(2)：116-123,8.DOI:10.13338/j.issn.1674-649x.2024.02.015
多连杆刚柔机械手设计与手指减振分析
Design of multi-link rigid-flexible manipulator and analysis of finger vibration reduction
摘要
Abstract
Aimed at the problem that it is difficult to grasp the fragile ceramic parts stably in the sorting process,a new multi-link rigid-flexible manipulator is designed,which can effectively and stably grasp them.Firstly,based on mechanical transmission,the rigid joint and flexible materi-al were combined to design the transmission mode of the manipulator and the optimal structure of the flexible joint,and the overall structure of the manipulator was constructed on three-dimen-sional software.Secondly,by simplifying the structure of the manipulator finger,the rigid-flexi-ble coupling dynamic model of finger multi-link with tip mass was constructed by using Lagrange theory and finite element discrete method,and the dynamic equation of the manipulator finger in the motion process was solved.On this basis,the finger structure of the manipulator was opti-mized and improved by designing the vibration reduction scheme.The simulation results show that the vibration amplitude of the fingers of the rigid-flexible manipulator with the improved structure is reduced by 8mm and the time to restore stability is shortened by more than 4s,which improves the impact resistance in the process of sorting and grasping to a certain extent and en-sures the stability in the process of grasping ceramic fragile parts.关键词
零件分拣/结构设计/有限元分析/刚柔机械手/减振实验Key words
parts sorting/structural design/finite element analysis/rigid and flexible manipula-tor/vibration reduction experiment分类
机械制造引用本文复制引用
管声启,郝振虎,王静国,马腾飞,师红宇..多连杆刚柔机械手设计与手指减振分析[J].西安工程大学学报,2024,38(2):116-123,8.基金项目
陕西省重点研发计划项目(2022GY-058) （2022GY-058）
西安市创新能力强基计划-人工智能技术攻关项目(21RGZN0021) （21RGZN0021）
