机电工程技术2024，Vol.53Issue(4)：152-158,200,8.DOI:10.3969/j.issn.1009-9492.2024.04.034
流程型制造模式下A公司粉料生产线效率优化设计
Optimized Efficiency Design of Powder Production Line of Company A Under Process Manufacturing Mode
摘要
Abstract
In the era of increasing labor costs,the development of automation is the only way for every manufacturing company to develop.The field investigation of powder line of Company A is conducted,and it is found that the production mode of powder line of this company is process production and has problems such as slow shape change,high defect rate and low production efficiency.So through lean management,innovation methods,quality management and reliability,basic industrial engineering,mechanical design knowledge and using FlexSim simulation software,the site layout and existing problems are analyzed by contradiction analysis,process function analysis,fish bone diagram and other methods.According to the effective improvement of its production capacity,equipment utilization rate and good product road,the optimal improvement scheme of the key type change cleaning device is selected by hierarchical analysis.The results show that the design process time is reduced by 50%,the change time is reduced by 30.5%,the flow rate of powder is better controlled,the capacity of this process powder production line is improved,and new ideas and specific schemes are provided for the operation of the production mode of A company.关键词
流程型生产/现场改善/换型改善/层次分析Key words
process production/site improvement/type improvement/level analysis分类
信息技术与安全科学引用本文复制引用
郭继东,龙丽涧,黄洁,杨意本,陈捷,宋长森,周大为..流程型制造模式下A公司粉料生产线效率优化设计[J].机电工程技术,2024,53(4):152-158,200,8.基金项目
北京理工大学珠海学院教育教学改革资助项目(2022002ZLGC) （2022002ZLGC）
