强激光与粒子束2024，Vol.36Issue(5)：9-14,6.DOI:10.11884/HPLPB202436.230341
一种角向传输线B-dot标定平台的设计
A design of B-dot calibration simulator for azimuthal transmission line
张信军 1罗维熙 1呼义翔 1尹佳辉 1周文渊1
作者信息
- 1. 西北核技术研究所强脉冲辐射环境模拟及效应国家重点实验室,西安 710024
- 折叠
摘要
Abstract
An off-line calibration platform is designed based on the requirement of off-line calibration of induction cavity azimuthal transmission line current probe.The analog device is a flat-plate transmission line structure,which has lower distortion than on-line calibration.The source of cross-platform calibration error is analyzed,and the measures to reduce the error are put forward.The analysis shows that the installation eccentricity and probe longitudinal installation depth are the biggest sources of cross-platform calibration error,which need to be paid attention to in engineering design.An off-line calibration platform is established and the error analysis is carried out.As a result,3.3%cross-platform calibration error is obtained.关键词
感应腔/角向传输线/B-dot/标定Key words
induction cavity/azimuthal transmission line/B-dot/calibration分类
信息技术与安全科学引用本文复制引用
张信军,罗维熙,呼义翔,尹佳辉,周文渊..一种角向传输线B-dot标定平台的设计[J].强激光与粒子束,2024,36(5):9-14,6.
