|国家科技期刊平台
首页|期刊导航|强激光与粒子束|适用于光导开关触发的V/N气体开关设计与验证

适用于光导开关触发的V/N气体开关设计与验证OA北大核心CSTPCD

Development and validation of V/N gas switches for photo conductive semiconductor switch triggers

中文摘要英文摘要

为了满足多路精确同步触发开关要求,将光导开关(PCSS)与V/N气体开关结合,可充分发挥PCSS低触发阈值、低抖动和光电隔离以及V/N气体开关工作电压高、带载能力强等优势.两种开关结合的核心是V/N气体开关结构参数与PCSS触发回路的参数匹配.分析计算了V/N气体开关的结构电容、触发回路振荡参数、开关电场分布等,研究了V/N气体开关的结构电容与PCSS、串联电感等构成的振荡回路的匹配关系,通过实验获得了V/N气体开关自击穿电压曲线、导通延迟时间以及不同欠压比下的延迟时间抖动等,初步验证了适用于PCSS触发的V/N气体开关设计.

To meet the requirements of multi-channel precise synchronous trigger switch,photo conductive semiconductor switch(PCSS)is combined with V/N gas switch,which takes advantage of the photoelectric isolation,low trigger threshold,low delay time jitter and photoelectric isolation of PCSS,as well as the advantages of high operating voltage and strong load capacity of V/N gas switch.The core of the combination of the two switches is that the structural parameters of the V/N gas switch match the parameters of the PCSS trigger loop.The structural capacitance,trigger loop oscillation parameters and switching electric field distribution of the V/N gas switch are analyzed and calculated.The relationship between the structural capacitance of the V/N gas switch and the oscillation loop composed of PCSS and series inductors is studied.The self-breakdown voltage curve,on-delay time and delay time jitter of the switch under different under voltage ratios are obtained.The performance of the V/N gas switch for PCSS triggering is preliminarily verified.

宋雨辉;高彬;王瑞杰;王凌云;周良骥;刘宏伟;张东东;陈林;袁建强;邓明海;谢卫平

大连理工大学电气工程学院,辽宁大连 116024||中国工程物理研究院流体物理研究所,四川绵阳 621900四川质安高电压工程技术研究中心,四川绵阳 621000中国工程物理研究院流体物理研究所,四川绵阳 621900大连理工大学电气工程学院,辽宁大连 116024中国工程物理研究院流体物理研究所,四川绵阳 621900||天府创新能源研究院,成都 610000

动力与电气工程

同步触发V/N气体开关PCSS结构电容自击穿电压

synchronous triggerV/N gap switchphoto conductive semiconductor switchstructural capacitanceself-breakdown voltage

《强激光与粒子束》 2024 (005)

一种高压快速光控脉冲晶闸管开关研究

68-74 / 7

国家自然科学基金项目(92166106、51807185、52007176、51577178)

10.11884/HPLPB202436.230347

评论