| 注册
首页|期刊导航|无机材料学报|碳纤维布表面PyC界面相微观结构及均匀性的工艺调控

碳纤维布表面PyC界面相微观结构及均匀性的工艺调控

薛轶凡 李玮洁 张中伟 庞旭 刘愚

无机材料学报2024,Vol.39Issue(4):399-408,中插10-中插12,13.
无机材料学报2024,Vol.39Issue(4):399-408,中插10-中插12,13.DOI:10.15541/jim20230512

碳纤维布表面PyC界面相微观结构及均匀性的工艺调控

Process Control of PyC Interphases Microstructure and Uniformity in Carbon Fiber Cloth

薛轶凡 1李玮洁 2张中伟 1庞旭 1刘愚3

作者信息

  • 1. 北京理工大学 先进结构技术研究院, 北京 100081
  • 2. 北京交通大学 土木建筑工程学院, 北京 100044
  • 3. 中南大学 粉末冶金研究院, 粉末冶金国家重点实验室, 长沙 410083
  • 折叠

摘要

Abstract

Mechanical properties of ceramic matrix composites are highly dependent on the microstructure and homogeneity of the interphase.This study examined the influence of process factors,such as deposition temperature,propylene partial pressure,retention time,and hydrogen partial pressure,on the microstructure and homogeneity of PyC interphase deposited on the surface of carbon fiber cloth.Various characterization techniques were used to characterize the microstructure and texture of the PyC interphase,and the inherent correlation between microstructure,uniformity,and process parameters was analyzed.The results show that increasing temperature and propylene partial pressure lead to a more regular texture in the interphase,while decreasing hydrogen partial pressure has the opposite effect,and retention time has little effects.Additionally,an increase in deposition temperature and propylene partial pressure leads to an uneven distribution of interphase thickness,and overhigh propylene partial pressure directly leads to the production of carbon black.Increasing retention time helps to improve interphase homogeneity.The interphase uniformity of medium and high textures firstly drops and then increases when the hydrogen partial pressure increases,but the interphase uniformity of low texture is less impacted.Ultimately,the study clarified the growth method of the PyC interphase.Furthermore,the research delved into the process factors influencing the texture and uniformity of the PyC interphase,which provided a basis for the fine regulation of PyC interface phase in the future.

关键词

陶瓷基复合材料/PyC界面相/均匀性/微观结构

Key words

ceramic matrix composite/PyC interphase/uniformity/microstructure

分类

化学化工

引用本文复制引用

薛轶凡,李玮洁,张中伟,庞旭,刘愚..碳纤维布表面PyC界面相微观结构及均匀性的工艺调控[J].无机材料学报,2024,39(4):399-408,中插10-中插12,13.

基金项目

国家重点研发计划(2022YFB3706100)National Key Research and Development Program of China(2022YFB3706100) (2022YFB3706100)

无机材料学报

OA北大核心CSTPCD

1000-324X

访问量0
|
下载量0
段落导航相关论文