中国医疗设备2024，Vol.39Issue(4)：35-40,6.DOI:10.3969/j.issn.1674-1633.2024.04.007
基于红外摄像装置的Triniti呼吸门控系统的设计和性能验证
Design and Performance Verification of Triniti Respiratory Gating System Based on Infrared Camera Device
摘要
Abstract
Objective To verify the clinical feasibility of the Triniti respiratory gating system by analyzing the respiratory motion waveform and 4DCT image consistency collected under the Triniti respiratory gating system and abdominal pressure belt.Methods The CIRS 18023-A respiratory motion model and supporting CIRS Motion Control software were used,the simulated standard respiratory movement and the respiratory movement curve of real patients were imported to simulate the cycle,amplitude and frequency of respiratory movement in human respiratory movement,and the different respiratory movement models were generated,and CT scans were triggered by two respiratory movement signals based on abdominal pressure belt and Triniti respiratory gating system,and the consistency of 4DCT triggered by the two devices was analyzed.Finally,according to the respiratory movement tracked by the Triniti system,the gating range was set to achieve gating treatment.Results The correlation of respiratory movement waveform curves collected by the two respiratory movement signal detection devices was more than 0.8(P＜0.001),and the measurement difference of the region of interest in each phase of the 4DCT image was(0.065±0.069)cm,with no statistical significance(P＞0.05).Conclusion The Triniti respiratory gating system based on infrared camera device can track respiration with high precision and realize clinical respiratory gating treatment,thus effectively reduce the impact of respiratory movement on radiotherapy.关键词
红外摄像原理/呼吸门控/4DCT/系统设计/门控延迟测量Key words
infrared camera principle/respiratory gating/4DCT/system design/gating delay measurement分类
医药卫生引用本文复制引用
刘颖,王鑫,徐瑶瑶,袁玲,潘宇龙..基于红外摄像装置的Triniti呼吸门控系统的设计和性能验证[J].中国医疗设备,2024,39(4):35-40,6.基金项目
广州市科技计划项目(202206010154). （202206010154）
