石油石化绿色低碳2024，Vol.9Issue(2)：56-60,5.
乙烯原料最适裂解温度研究
Study on Optimum Cracking Temperature of Ethylene raw material
朱泽强1
作者信息
- 1. 中国石化镇海炼化公司,浙江宁波 315207
- 折叠
摘要
Abstract
The product distribution of gas,naphtha and hydrogenation tail oil under different cracking temperature was explored by using the method of cracking furnace calibration.The optimum temperature was obtained by selecting the best economic benefit point,considering the relatively good yield of high byproducts and the operation period of cracking furnace at the corresponding temperature.After data analysis,the optimal temperature of cracking gas in 1#cracking furnace is determined to be 860℃,and the optimal temperature of cracking hydrogenation tail oil in 6#cracking furnace is determined to be 810℃,and the P/E ratio is 0.6.The optimum temperature for cracking naphtha in 7#cracking furnace is 845℃,and the P/E ratio is 0.56.关键词
裂解炉/标定/裂解温度/乙烯/高附收率/丙/乙比Key words
cracking furnace/calibration/cracking temperature/ethylene/high byproduct yield/P/E ratio引用本文复制引用
朱泽强..乙烯原料最适裂解温度研究[J].石油石化绿色低碳,2024,9(2):56-60,5.
