强激光与粒子束2024，Vol.36Issue(6)：103-111,9.DOI:10.11884/HPLPB202436.240034
强流脉冲束流位置探测器标定技术
Calibration technology of intense pulse electron beam position monitor
摘要
Abstract
Accurate measurement of the intense pulse electron beam is required by upgrade of linear induction accelerator.This is achieved by not only the technology of beam position monitor(BPM)design and assamble,but also the calibration of BPM.This paper describes the research of calibration technology based on the measuring principle of intense pulse electron beam position monitor in linear induction accelerator.Theoretic method is used to calculate calibrated effects in different signal calculation,polynomial fit and calibration.Characteristic plane calibration is provided according to the analytic results.In the system of BPM position calibration,the No.23 RRM(resistive ring monitor)of multi-pulse electron linear induction accelarator is calibrated by different method.The experimental results validate the theoretic results.The calibration method of intense pulse electron beam position monitor is decided according to the results of research.关键词
直线感应加速器/脉冲电子束/位置探测器/标定技术/标定方法Key words
linear induction accelerator/pulse electron beam/position monitor/calibration technology/calibration method分类
信息技术与安全科学引用本文复制引用
李勤,张肇驿,蒋薇,刘云龙,王永伟,龙全红..强流脉冲束流位置探测器标定技术[J].强激光与粒子束,2024,36(6):103-111,9.基金项目
国防科技专项研究基金项目 （）
