| 注册
首页|期刊导航|中南大学学报(自然科学版)|基于活塞压载试验预测高压辊磨机静压功指数的方法

基于活塞压载试验预测高压辊磨机静压功指数的方法

吴俊杰 马阳 崔少文 刘恩建 郭小飞 代淑娟 李丽匣

中南大学学报(自然科学版)2024,Vol.55Issue(4):1272-1280,9.
中南大学学报(自然科学版)2024,Vol.55Issue(4):1272-1280,9.DOI:10.11817/j.issn.1672-7207.2024.04.002

基于活塞压载试验预测高压辊磨机静压功指数的方法

Method for predicting the static pressure work index of a high-pressure roller mill based on piston ballast tests

吴俊杰 1马阳 1崔少文 2刘恩建 1郭小飞 1代淑娟 1李丽匣3

作者信息

  • 1. 辽宁科技大学矿业工程学院,辽宁鞍山,114051
  • 2. 本溪龙新矿业有限公司,辽宁本溪,117013
  • 3. 东北大学资源与土木工程学院,辽宁沈阳,110819
  • 折叠

摘要

Abstract

Based on the Bond's third theory of comminution,static pressing specific energy was used as an indicator to evaluate the energy consumption in the crushing of ore materials by high-pressure grinding roller(HPGR).The effects of different applied pressures on the particle size,specific energy consumption,and breakage ratio of ores in piston pressing experiments were investigated,and suitable conditions for different ore piston pressing experiments were determined.The static pressure work index for HPGR of gold ore,magnetite ore,and vanadium-titanium magnetite ore were determined.And the test results were compared with those of the net input power for crushing the same type of ores in actual production with HPGR.The results show that under the conditions of increasing pressure in the piston pressing experiments,the fine particle mass fraction and particle size distribution of the three types of ore increase,and the variation in crushing effect gradually decreases.Under a loading pressure of 80 MPa and a loading rate of 0.2 mm/s,the static pressure work index of HPGR is 1.36 kW·h/t for gold ore,1.44 kW·h/t for magnetite ore,and 1.42 kW·h/t for vanadium-titanium magnetite.The absolute value of relative error between the static pressure work index and the net specific energy consumption in industry practice is within 5.26%.The experimental results can predict the static pressure work index of HPGR and provide a theoretical basis for equipment selection.

关键词

高压辊磨机/Bond粉碎理论/活塞压载试验/静压功指数/预测模型

Key words

high-pressure grinding roller(HPGR)/Bond crushing theory/piston press loading experiment/static pressure work index/prediction model

分类

矿业与冶金

引用本文复制引用

吴俊杰,马阳,崔少文,刘恩建,郭小飞,代淑娟,李丽匣..基于活塞压载试验预测高压辊磨机静压功指数的方法[J].中南大学学报(自然科学版),2024,55(4):1272-1280,9.

基金项目

辽宁省"兴辽英才计划"项目(XLYC20020208) (XLYC20020208)

辽宁省教育厅资助项目(JYTZD2023097)(Project(XLYC20020208)supported by LiaoNing Revitalization Talents Program (JYTZD2023097)

Project(JYTZD2023097)supported by Program of the Educational Department of Liaoning Province) (JYTZD2023097)

中南大学学报(自然科学版)

OA北大核心CSTPCD

1672-7207

访问量0
|
下载量0
段落导航相关论文