金刚石与磨料磨具工程2024，Vol.44Issue(2)：228-236,9.DOI:10.13394/j.cnki.jgszz.2023.0094
砂带磨损对螺杆转子磨削去除深度影响分析
Analysis of the influence of abrasive belt wear on the removal depth of grinding screw rotor
摘要
Abstract
To ensure the uniformity of material removal during surface grinding of screw rotors,a mathematical model for the material removal depth of screw rotors is established,considering the impact of abrasive wear on grinding re-moval depth.Based on the theory of elastic-plastic deformation and the wear pattern of abrasive particles during grind-ing,a theoretical model for the removal rate of single abrasive material is established.The wear of abrasive particles is divided into two stages:the rapid wear stage and the stable wear stage.Based on the number of abrasive particles per unit contact area and the rule of abrasive cutting edge,the maximum cutting depth of abrasive particles is calculated by numerical integration and contact pressure,and the mathematical model of macroscopic material removal rate based on abrasive belt wear is established.The model consideres the wear of the sand belt.The maximum error of the predicted value is 9.6％,and the minimum error is 4.1％compared with the experimental value.The experimental data fully veri-fy the effectiveness of the model,and can provide a theoretical basis for ensuring the profile accuracy of the screw rotor.关键词
砂带磨损/数学模型/去除深度/螺杆转子/模型验证Key words
belt wear/mathematical model/removal depth/screw rotor/model verification分类
金属材料引用本文复制引用
陈斯睿,孙兴伟,杨赫然,刘寅..砂带磨损对螺杆转子磨削去除深度影响分析[J].金刚石与磨料磨具工程,2024,44(2):228-236,9.基金项目
辽宁省应用基础研究计划项目(2022JH2/101300214) （2022JH2/101300214）
2022年度辽宁省教育厅高等学校基本科研项目面上项目(LJKMZ20220459). （LJKMZ20220459）
