家电科技2024，Vol.2Issue(2)：52-56,5.DOI:10.19784/j.cnki.issn1672-0172.2024.02.007
基于智能制造的冰箱压缩机底座受载变形模拟分析研究
Simulation and analysis of the deformation of the refrigerator compressor bracket under force based on intelligent manufacturing
摘要
Abstract
In order to reduce labor costs,while improving production efficiency and increasing output,in the refrigerator compressor industry,the requirements for intelligent manufacturing are getting higher and higher.Takes a certain type of compressor as an object,analyzes its bracket deformation during the bending and calibrating process in intelligent manufacturing,and considers the whole process as a quasi-static system according to the actual load.According to the actual loading of the bracket,the whole process is regarded as a quasi-static system.Based on ANSYS Workbench software to establish the finite element model of each process,calculate the stress and deformation results of the bracket.Then targeted improvement programs are proposed.In addition,the evaluation criterion of the stress result of the bracket is also established,and the concepts of stress coefficient S and maximum stress aMAX are introduced,so as to evaluate the risk of load and deformation of the optimization scheme in various different processes and give a definite conclusion.At the same time,mold processing was carried out for the improvement plan,and online verification was carried out,effectively improving the deformation problem of the base.关键词
智能制造/底座变形/应力系数/最大应力Key words
Intelligent manufacturing/Deformation of bracket/Stress factor/Maximum stress分类
信息技术与安全科学引用本文复制引用
张巍,胡鹏翔,陈新杰..基于智能制造的冰箱压缩机底座受载变形模拟分析研究[J].家电科技,2024,2(2):52-56,5.基金项目
本文由广东美芝精密制造有限公司内部项目"往复式压缩机家用静音技术开发项目"支持. （）
