压力容器2024，Vol.41Issue(3)：59-66,80,9.DOI:10.3969/j.issn.1001-4837.2024.03.008
基于泄漏率的垫片参数测试方法优化研究
Experimental research of optimized testing method on the gasket parameters based on leakage rate
摘要
Abstract
Maintenance factor m and yield factor y are two key gasket parameters in the design of bolted flange joints.However,the wildly used y and m values in ASME Ⅷ.1 and GB/T 150.3 code are derived from engineering experience,which are based on structural strength and are not related to the leakage level.By researching and analyzing the advantages and disadvantages of current testing method on gasket parameters,a new optimized testing method was proposed,which is much more in line with the domestic gasket standard system and engineering application.The comparison experiments and verification tests on the 8 typical kinds of gaskets were carried out,showing that the test results have an error of about 1%.The porous model and Logistic model were used to fit the test results.The results show that the procedure and parameters of the new method are more reasonable.It can be used for reference in the design of bolted flange joints.关键词
垫片/螺栓法兰/垫片系数/预紧比压/泄漏率Key words
gasket/bolted flange/maintenance factor/yield factor/leakage rate分类
机械制造引用本文复制引用
李科,包健,高志刚,陶兰兰,张斌..基于泄漏率的垫片参数测试方法优化研究[J].压力容器,2024,41(3):59-66,80,9.基金项目
国家市场监督管理总局科技计划项目(2021MK042) （2021MK042）
江苏高校"青蓝工程"中青年学术带头人项目(苏教师函[2021]11号) （苏教师函[2021]11号）
