口腔疾病防治2024，Vol.32Issue(8)：589-597,9.DOI:10.12016/j.issn.2096-1456.2024.08.003
超高分子量聚乙烯纤维结合不同树脂修复缺损乳磨牙的断裂载荷及边缘密闭性研究
Fracture resistance and marginal adaptation of primary molar defects repaired with ultra-high-molecular-weight polyethylene combined with various restorative materials
摘要
Abstract
Objective To evaluate the impact of ultra-high-molecular-weight polyethylene(UHMWPE)-Ribbond fi-bers,when combined with different restorative materials,on fracture resistance and marginal adaptation of isolated pri-mary molar defects,to provide a reference for clinical practice.Methods This study was approved by the Ethics Re-view Committee.A total of 72 extracted primary molars with complete crowns were collected,and 66 primary molars were randomly assigned as experimental groups for the fracture resistance and microleakage tests.The molars were di-vided into six groups(n=11)based on the type of restorative materials and the application of Ribbond fibers:Group A1,3M Filtek Z250+Ribbond;Group A2,3M Filtek Z250;Group B1,Beautifil Ⅱ LS+Ribbond;Group B2,Beautifil Ⅱ LS;Group C1,3M Filtek Bulk Fill+Ribbond;and Group C2,3M Filtek Bulk Fill.Groups A1,B1 and C1 received the fiber-reinforcing technique,whereas Groups A2,B2 and C2 received the direct restorative technique;the remainings were in Group D(blank control group),which did not receive treatment for the fracture resistance test.The fracture re-sistance test was divided into six experimental groups and one blank control group(n=6).Primary molar teeth in each experimental group were prepared with Class Ⅱ cavities and filled.The fracture load of all samples was detected,and the fracture mode was analyzed after thermal cycling.The microleakage test was divided into six experimental groups,with five in each group.Class Ⅰ cavities with a diameter of 3 mm and depth of 2.5 mm were prepared within the mesial and distal marginal ridges on the occlusal surface and filled for primary molars in each group.Marginal microleakage was assessed after thermal cycling.Results The fracture resistance test results showed that the fracture resistance in groups that received the fiber-reinforcing technique was greater than that in groups that received the direct restorative technique:Group A1>Group A2,Group B1>Group B2,Group C1>Group C2(P<0.05).The application of Ribbond fibers increased fracture resistance to all tested restorative materials by 37.08％to 39.34％.The proportion of tooth frac-ture decreased significantly in groups A1,C1 compared with A2,C2,with a significant increase in the occurrence rate of"Repairable"(P<0.05).The fracture resistance in Group A1 was significantly greater than that in Group B1 and Group C1(P<0.05).The marginal microleakage test results showed that the microleakage depth in groups that received the fiber-reinforcing technique was smaller than that in groups that received the direct restorative technique:Group A1<Group A2,Group B1<Group B2,Group C1<Group C2(P<0.05).The microleakage depth in groups that re-ceived the fiber-reinforcing technique decreased by 53.90％to 66.96％compared to that in groups that received the di-rect restorative technique.The microleakage depth in Group B1 was significantly less than that in Group A1 and Group C1.Conclusion The application of Ribbond fibers combined with various restorative materials could enhance fracture resistance and diminish the microleakage depth to improve marginal adaptation.关键词
乳磨牙/牙体缺损/纤维强化复合树脂技术/超高分子量聚乙烯纤维/断裂载荷/边缘密闭性/微渗漏/仿生化修复Key words
primary molar teeth/tooth defect/fiber-reinforing composite restoration technique/ultra-high-mo-lecular-weight polyethylene(UHMWPE)/fracture resistance/marginal adaptation/microleakage/biomimetic res-toration分类
医药卫生引用本文复制引用
董鑫荷,吕晶,刘宇昊,吕学超,朱颐馨,金星爱..超高分子量聚乙烯纤维结合不同树脂修复缺损乳磨牙的断裂载荷及边缘密闭性研究[J].口腔疾病防治,2024,32(8):589-597,9.基金项目
黑龙江省自然科学基金(LH2022H042 （）
H2016037) This study was supported by the grants from National Natural Science Foundation of Heilongjiang Province(No.LH2022H042,No.H2016037). （No.LH2022H042,No.H2016037）
