| 注册
首页|期刊导航|液压与气动|活塞式蓄能器在超大型液压打桩锤上的应用研究

活塞式蓄能器在超大型液压打桩锤上的应用研究

冯小星 李泽 梅卫东 季鹏 彭熙伟 唐永卫

液压与气动2024,Vol.48Issue(6):179-188,10.
液压与气动2024,Vol.48Issue(6):179-188,10.DOI:10.11832/j.issn.1000-4858.2024.06.020

活塞式蓄能器在超大型液压打桩锤上的应用研究

Research on Application of Piston Accumulator on Ultra Large Hydraulic Pile Hammer

冯小星 1李泽 1梅卫东 1季鹏 1彭熙伟 2唐永卫3

作者信息

  • 1. 江苏龙源振华海洋工程有限公司,江苏南通 226014
  • 2. 北京理工大学 自动化学院,北京 100081
  • 3. 福建龙源海上风力发电有限公司,福建 莆田 351100
  • 折叠

摘要

Abstract

As an auxiliary power source for compensating the peak flow rate of hydraulic pile hammers,piston type accumulators have a significant impact on the dynamic characteristics of hydraulic pile hammers.In order to optimize the dynamic characteristics of hydraulic pile hammers,the working principle of double acting hydraulic pile hammers is analyzed,and the basis for selecting the type of accumulator is elaborated.Theoretical analysis is conducted on the calculation of accumulator volume and inflation pressure parameters.Aiming at the characteristics of significant dynamic changes in flow and pressure during the impact process of hydraulic pile hammers,as well as non-linear coupling of flow and pressure,a simulation model of hydraulic pile hammers is established based on the AMESim software platform.Based on the relevant data of 4400 kJ ultra large hydraulic pile hammers,simulation parameters are determined to study the influence of charging pressures of 18 and 14 MPa on the dynamic characteristics of hammer core displacement,velocity,acceleration,etc.The simulation results show that under the condition of charging pressure of 18 MPa,the peak flow rate of the rodless chamber of the hydraulic cylinder is insufficient during the striking process,with a maximum striking speed of 5.5 m/s and a maximum striking acceleration of 14.1 m/s2;When the charging pressure of the accumulator is reduced to 14 MPa,there is no insufficient oil supply in the rodless chamber during the striking process,the maximum striking speed is 6 m/s,and the maximum striking acceleration is 14.2 m/s2,achieving a control effect of fast hitting speed and good system stability.

关键词

液压传动/液压打桩锤/蓄能器

Key words

hydraulic transmission/hydraulic pile hammer/accumulator

分类

机械制造

引用本文复制引用

冯小星,李泽,梅卫东,季鹏,彭熙伟,唐永卫..活塞式蓄能器在超大型液压打桩锤上的应用研究[J].液压与气动,2024,48(6):179-188,10.

基金项目

江苏省工业和信息产业转型升级专项资金(2022LYZH) (2022LYZH)

液压与气动

OA北大核心CSTPCD

1000-4858

访问量2
|
下载量0
段落导航相关论文