化工学报2024，Vol.75Issue(5)：1966-1976,11.DOI:10.11949/0438-1157.20240248
浸锑石墨与无压烧结SiC和3D打印SiC密封材料配对副的摩擦磨损特性研究
Study on friction and wear behaviors of antimony impregnated graphite with pressureless sintered SiC and 3D-printed SiC sealing materials pairs
摘要
Abstract
In order to study the tribological properties of sealing materials for dry gas seals,the tribometer equipped with a rotating module was used to investigate the friction and wear characteristics of three kinds of antimony impregnated graphite when paired with pressureless sintered SiC and 3D-printed SiC under dry friction conditions.The effects of velocity and load on the friction and wear characteristics of sealing materials were analyzed,and the wear mechanisms on the surface of mating materials were revealed.The results show that the friction coefficient and wear rate gradually decreases with the increase of the product of load p and velocity v(pv value).When the pv value is low,the wear mechanism is severe abrasive wear and slight adhesive wear.When the pv value is high,the wear mainly occurs between the graphite transfer layers adhered to the silicon carbide friction surface,and the wear mechanism is mainly adhesive wear.In order to study the effect of pv value changes on the friction and wear characteristics of antimony impregnated graphite and silicon carbide sealing materials,the testing program which changes the velocity while fixing the load is preferable.关键词
密封材料/浸锑石墨/无压烧结SiC/3D打印SiC/摩擦磨损特性/磨损机理Key words
seal material/antimony impregnated graphite/pressureless sintered SiC/3D-printed SiC/friction and wear behavior/wear mechanism分类
机械制造引用本文复制引用
柴杨洋,彭旭东,江锦波,孟祥铠,马艺..浸锑石墨与无压烧结SiC和3D打印SiC密封材料配对副的摩擦磨损特性研究[J].化工学报,2024,75(5):1966-1976,11.基金项目
国家自然科学基金项目(52076195,52075491) （52076195,52075491）
浙江省自然科学基金重大项目(LD21E050002) （LD21E050002）
