| 注册
首页|期刊导航|重庆理工大学学报|基于RSM法的柴油机进气系统参数优化研究

基于RSM法的柴油机进气系统参数优化研究

徐照明 邓晰文 何述超

重庆理工大学学报2024,Vol.38Issue(9):269-275,7.
重庆理工大学学报2024,Vol.38Issue(9):269-275,7.DOI:10.3969/j.issn.1674-8425(z).2024.05.034

基于RSM法的柴油机进气系统参数优化研究

Research on parameter optimization of diesel engine intake system based on RSM method

徐照明 1邓晰文 2何述超3

作者信息

  • 1. 昆明理工大学 云南省内燃机重点实验室, 昆明 650500
  • 2. 昆明理工大学 云南省内燃机重点实验室, 昆明 650500||昆明云内动力股份有限公司 云南省内燃机高原排放重点实验室, 昆明 650200
  • 3. 昆明云内动力股份有限公司 云南省内燃机高原排放重点实验室, 昆明 650200
  • 折叠

摘要

Abstract

The intake condition of diesel engines significantly influences the formation of the air-fuel mixture and combustion process.Optimizing intake parameters is crucial in addressing the"air-fuel ratio"issue in diesel engines, enhancing their performance, efficiency, and emission characteristics.This paper focuses on a high-pressure common rail diesel engine.Utilizing existing experimental data, a one-dimensional performance simulation model in GT-Power is built.At the maximum torque operating point,by varying intake pressure, intake temperature, intake valve opening angle, and exhaust valve closing angle individually, the effects of these variables on torque and brake specific fuel consumption are investigated.Employing the RSM (Response Surface Methodology), second-order regression models for torque and brake specific fuel consumption are established.Our study generates the weighted ranking of factors influencing torque and brake specific fuel consumption, performing a multi-objective optimization to balance maximum torque and minimum brake specific fuel consumption, yielding optimized calibration parameters.Our results indicate at intake pressure of 2.27 bar, intake temperature of 369 K, intake valve opening angle of 459°CA, and exhaust valve opening angle of 255°CA, the combination leads to a torque increase of 311.08 N · m, a 6.51% improvement over the original engine.Furthermore, the brake specific fuel consumption decreases to 204 .11 g/( kW · h ) , down by 6 .25%.The maximum cylinder pressure is 154 bar, and the turbine inlet exhaust temperature is 883 K, meeting the specified limitations.Our study demonstrates the feasibility of using RSM for collaborative optimization of diesel engine intake system parameters, achieving the corresponding target requirements.

关键词

柴油机/RSM法/进气系统参数/优化

Key words

diesel engine/RSM/intake system parameters/optimization

分类

能源科技

引用本文复制引用

徐照明,邓晰文,何述超..基于RSM法的柴油机进气系统参数优化研究[J].重庆理工大学学报,2024,38(9):269-275,7.

基金项目

云南省基础研究计划项目(202101AT070266) (202101AT070266)

重庆理工大学学报

OA北大核心

1674-8425

访问量0
|
下载量0
段落导航相关论文