二苯基硅基改性的加成型聚二甲基硅氧烷离型涂层的合成及性能OA
Synthesis and Properties of Addition Formed Polydimethylsiloxane Release Coatings Modified with Diphenylsilyl Groups
以甲醇钾为催化剂,四(二甲基乙烯基硅氧基)硅烷(TVDMS)为封端剂,三(三甲基硅基)磷酸酯为中止剂,使用二甲基硅氧烷混合环体(DMC)、四乙烯基四甲基环四硅氧烷(V4)、八苯基环四硅氧烷(P8)为原料,通过高温阴离子开环聚合反应环境友好地成功合成了二苯基硅基改性的含乙烯基的聚二甲基硅氧烷,并利用 FT-IR、HNMR和GPC对其结构和分子量数据进行了表征,将其制备成离型涂层后,通过 180°剥离力测试、疏水角测量、折光率测量等对其性能进行了表征.结果表明,固化样品硬度高,透明性好,折光率随苯基含量的提高而提高,涂层具有 100~110°的水接触角,随着苯基含量的提高,剥离力和残余接着率都有所下降.
Using potassium methoxide as a catalyst,tetrakis(vinyldimethylsiloxy)silane(TVDMS)as a capping agent,and tri(trimethylsilyl)phosphate as a neutralizer,dimethylcyclosiloxane(DMC),2,4,6,8-Tetravinyl-2,4,6,8-tetramethylcyclotetrasiloxane(V4),and octaphenylcyclotetrasiloxane(P8)were used as materials,a diphenylsilyl modified vinyl-containing polydimethylsiloxane was successfully synthesized through high-temperature anionic ring opening polymerization reaction environmentally friendly.Its structure and molecular weight data were characterized by FT-IR,HNMR,and GPC.After preparing it as a release coating,its properties were characterized by 180° peel force test,hydrophobic angle measurement,refractive index measurement,etc.The results show that the cured sample has high hardness and good transparency,and its refractive index increases with the increase of phenyl content.The release coating has a water contact angle of 100~110°,and as the phenyl content increases,the peel strength and residual adhesion decrease.
王峰;黄月文;姚鸣峰;王斌;张耀东
中国科学院广州化学研究所,广东 广州 510650||中国科学院大学,北京 101408中国科学院广州化学研究所,广东 广州 510650||中国科学院新型特种精细化学品工程实验室,广东 广州 510650||国科广化韶关新材料研究院,广东 韶关 512400中国科学院广州化学研究所,广东 广州 510650||中国科学院新型特种精细化学品工程实验室,广东 广州 510650中国科学院广州化学研究所,广东 广州 510650||中国科学院新型特种精细化学品工程实验室,广东 广州 510650||国科广化精细化工孵化器(南雄)有限公司,广东 南雄 512400
化学工程
阴离子开环聚合高温四(二甲基乙烯基硅氧基)硅烷硅氢加成二苯基聚硅氧烷离型涂层
anionic ring opening polymerizationhigh temperaturetetrakis(vinyldimethylsiloxy)silanehydrosilylationdiphenyl polysiloxanerelease coating
《广州化学》 2024 (003)
7-11 / 5
评论