| 注册
首页|期刊导航|化工进展|流化床喷雾浸渍制备负载型钠基CO2吸附剂脱碳性能

流化床喷雾浸渍制备负载型钠基CO2吸附剂脱碳性能

智远 马吉亮 陈晓平 刘道银 梁财

化工进展2024,Vol.43Issue(6):2961-2967,7.
化工进展2024,Vol.43Issue(6):2961-2967,7.DOI:10.16085/j.issn.1000-6613.2023-0800

流化床喷雾浸渍制备负载型钠基CO2吸附剂脱碳性能

Decarbonization capability of supported Na-based CO2 adsorbents prepared by fluidized bed spray impregnation

智远 1马吉亮 1陈晓平 1刘道银 1梁财1

作者信息

  • 1. 东南大学能源与环境学院,江苏 南京 210096
  • 折叠

摘要

Abstract

The traditional Na-based sorbent solid adsorbents have the bottleneck problem of large grain size,high gas diffusion resistance,and limited load,which leads to low CO2 adsorption capability.A new adsorbent preparation method based on fluidized bed spray impregnation technology has been created.γ-Al2O3 was used as the support,and high-purity Na2CO3 was selected as the active component.The solution impregnation method and fluidized bed spray impregnation method were used to prepare several groups of adsorbents with different carrier structure and active component loading.Based on a fixed bed experimental setup combined with BET,XRD,SEM,XRF and other methods,the CO2 adsorption capability of the adsorbents,as well as key parameters such as pore structure,crystal form,surface morphology,and loading capacity,were characterized.The results showed that the saturated adsorption capability and adsorption activity of the adsorbent prepared by the spray impregnation method were better than those of the traditional impregnation method under the same loading capacity of active components,because this method can control the loading depth of active components on the support.Meanwhile,the active components were mostly crystallized in needle or rod-shaped forms that were conducive to the reaction.The crystal size was generally 10%—20%smaller than that of traditional solution impregnation methods.Nevertheless,the pore structure of the carrier,such as specific surface area and pore size distribution,will still limit the reaction of the adsorbent prepared by the fluidized bed spray impregnation technology.

关键词

二氧化碳捕集/吸附剂/碳酸钠/喷雾浸渍/流化床

Key words

CO2 capture/adsorbents/sodium carbonate/dry impregnation/fluidized-bed

分类

化学化工

引用本文复制引用

智远,马吉亮,陈晓平,刘道银,梁财..流化床喷雾浸渍制备负载型钠基CO2吸附剂脱碳性能[J].化工进展,2024,43(6):2961-2967,7.

基金项目

江苏省碳达峰碳中和科技创新专项资金(BK20220001). (BK20220001)

化工进展

OA北大核心CSTPCD

1000-6613

访问量0
|
下载量0
段落导航相关论文