机电工程技术2024，Vol.53Issue(6)：24-28,5.DOI:10.3969/j.issn.1009-9492.2024.06.006
基于NX/MCD光机电一体化数字孪生体虚拟实训平台的开发
Development of NX/MCD Based Digital Twin Virtual Training Platform with Optoelectromechanical Integration
摘要
Abstract
According to the current situation and demand of mechatronics integration training in vocational colleges,the development idea of digital twin mechatronics training platform for reference to the practical experience of digital twin technology is put forward.Based on Siemens NX/MCD and taking the existing INGO-558 opto-mechatronics equipment as an example,the composition and movement process of opto-mechatronics physical equipment are described.3D models are drawn with SolidWorks 2019;Siemens NX/MCD software is used to configure electromechanical properties of 3D model and set signals;TIA software is used to establish the model MCD signal and PLC variable connection.Then,PLC program is written,PLC hardware platform,network communication,process flow program are configured,and HMI interface is designed.After compiling the program,PLCsim Advanced is used to download the program and starts SIMIT simulation to verify the correctness of the PLC program and the rationality of the mechanical structure design.When deviation from expectation occurs,check the PLC program running status and MCD signal trigger and simulation sequence running status will be checked and modify according to the corresponding error;When the results meets the expectations,the program will be downloaded to the PLC of the equipment,the debugging of the equipment is then completed.关键词
NX/MCD/数字孪生/机电一体化实训Key words
NX/MCD/digital twin/mechatronics integration training分类
计算机与自动化引用本文复制引用
王飞,唐伟强..基于NX/MCD光机电一体化数字孪生体虚拟实训平台的开发[J].机电工程技术,2024,53(6):24-28,5.基金项目
广东省普通高校重点领域专项(智能制造)(2020ZDZX2078) （智能制造）
