有色金属材料与工程2024，Vol.45Issue(3)：99-104,6.DOI:10.13258/j.cnki.nmme.20230225001
轧制工艺对TA15钛合金板微观组织及拉伸力学性能的影响
Effect of rolling process on microstructure and tensile properties of TA15 titanium alloy sheet
摘要
Abstract
A comparative study was conducted on the microstructure and mechanical properties of TA15 titanium alloy thin sheets prepared using the pack rolling process and conventional cold rolling process.The study revealed that the phases,sizes,and volume fractions of the microstructures in both longitudinal and transverse directions were similar for the two processes,with higher Vickers hardness in the longitudinal direction.Compared to TA15 titanium alloy thin sheets prepared by cold rolling,those produced by hot rolling exhibited superior mechanical properties,with smaller differences in mechanical properties between the longitudinal and transverse directions,better overall performance,and higher room temperature yield strength.This demonstrated a contrasting characteristic of"transverse greater than longitudinal,hot rolling greater than cold rolling".The hot rolling process can weaken directional texture,resulting in sheets with a tensile mechanical property characteristic of"high strength,large yield-to-tensile ratio,small difference between longitudinal and transverse directions".关键词
热轧/冷轧/显微组织/拉伸性能/屈强比Key words
hot rolling/cold rolling/microstructure/tensile property/yield ratio分类
矿业与冶金引用本文复制引用
孙梦桐,郭金榜,高飞,强刚刚,文志刚..轧制工艺对TA15钛合金板微观组织及拉伸力学性能的影响[J].有色金属材料与工程,2024,45(3):99-104,6.基金项目
公司控资资助项目(2019-GY-147) （2019-GY-147）
