金属加工（热加工）Issue(7)：132-134,3.
壳体铸件3D打印技术的应用
3D printing technology application in the block casting
胡顺 1张向松1
作者信息
- 1. 中石化四机石油机械有限公司 湖北荆州 434024
- 折叠
摘要
Abstract
The block was produced by casting technique because it's complex shape.The traditional casting process is sand casting,but the casting blank is often defective at its bottom,because the local of the casting blank in design of gating system.Now the limitations of the gating system are solved through the introduction and application of 3D printing technology,and simulate the pouring process and the defect part by software,improve the yield of castings.关键词
砂型铸造/造型/冒口/3D打印Key words
sand casting/sculpt/casting head/3D printing technology引用本文复制引用
胡顺,张向松..壳体铸件3D打印技术的应用[J].金属加工（热加工）,2024,(7):132-134,3.
