一种新型双端口三电平变换器OA北大核心CSTPCD
A novel dual-port three-level converter
针对传统背靠背三电平变换器成本高、体积大、结构复杂等问题,文中提出一种新型双端口三电平变换器拓扑,通过器件复用方式减少开关器件数量,优化系统结构.首先,详细分析所提新型拓扑的工作原理,给出单相桥臂的6种有效开关状态、电流流通路径及对应双端口输出电平,并对各开关器件的电压应力进行分析.其次,研究并设计一种适用于该新型拓扑的载波层叠脉宽调制策略,加入直流偏移量以避免调制波重合产生的影响.然后,进一步分析该策略在同频与异频工作模式下的调制度范围、相角差…查看全部>>
Aiming to address the problems of high cost,large size and complex structure of the traditional back-to-back three-level converter,this paper proposes a new dual-port three-level converter topology.This new topology reduces the number of switching devices and optimizes the system size through device multiplexing.Firstly,the operating principle of the proposed converter topology is analyzed in detail,outlining the six effective switching states,current flow p…查看全部>>
王贵峰;袁昕;姜云辉;王建飞;林志芳
江苏师范大学电气工程及自动化学院,江苏徐州 221116江苏师范大学电气工程及自动化学院,江苏徐州 221116江苏师范大学电气工程及自动化学院,江苏徐州 221116江苏师范大学电气工程及自动化学院,江苏徐州 221116江苏师范大学电气工程及自动化学院,江苏徐州 221116
动力与电气工程
变换器双端口载波层叠脉宽调制直流偏移调制度电能质量
converterdual-portlevel-shifting pulse width modulationDC offsetsmodulation regimepower quality
《电力工程技术》 2024 (4)
217-225,9
国家自然科学基金资助项目(12205122)
评论