云南冶金2024，Vol.53Issue(3)：146-149,4.
阳极钢爪铁液熔炼工艺技术研究及实践
Technical Research and Practice of Melted Iron Smelting Process of Anode Steel Claw
何玉鸿 1高显宏 1何阳阳 1杨诚1
作者信息
- 1. 云南云铝绿源慧邦工程技术有限公司,云南昆明 650502
- 折叠
摘要
Abstract
Melted iron produced by anode steel claw(brand name is ZG200-400)melting process technology,which chemical component is unqualified,so it analyzed the main influence factors for anode steel claw melted iron smelting,such as equipment selection,proportioning,smelting process,and chemical components,the improved intermediate frequency furnace management is adopted,the proportioning and feeding management,smelting process,and chemical composition controlling method are optimized,after practice,the operation failure rate of the intermediate frequency furnace is reduced by 64％;the unqualified temperature of steel claw melted iron out of the furnace is decreased by 53％;The unqualified times of steel claw melted iron's chemical component is decreased by 76％.关键词
阳极钢爪/铁液/熔炼/中频炉/工艺/控制Key words
anode steel claw/melted iron/smelting/intermediate frequency furnace/process/control分类
化学化工引用本文复制引用
何玉鸿,高显宏,何阳阳,杨诚..阳极钢爪铁液熔炼工艺技术研究及实践[J].云南冶金,2024,53(3):146-149,4.
