重型机械Issue(3)：70-75,6.
600MPa级车轮用高强钢的成形性能评价研究
Research on the formability evaluation of grade wheels highl-strength steel for 600 MPa
耿聪 1张柳鑫 1邓偲瀛2
作者信息
- 1. 常州东方特钢有限公司,江苏 常州 213000
- 2. 中国科学院金属研究所师昌绪先进材料创新中心,辽宁 沈阳 110016
- 折叠
摘要
Abstract
High-strength steel is a key material that affects the process of automobile lightweight,which can reduce the weight of automobiles and improve the collision safety at the same time,and has been widely used in the structural parts of automobiles.This paper discusses the formability of three kinds of 600 MPa grade automotive high strength steels.The paper compares the mechanical properties and formability of three kinds of high-strength steels,and provides a numerical simulation method that considers the anisotropy of sheet metal and uses the maximum principal strain to judge the fracture.The feasibility of this method is verified by the comparison between test and simulation,and the LDR values of the three materials are predicted.关键词
汽车用高强钢/各向异性/板成形性能/数值模拟Key words
automotive high-strength steel/anisotropy/sheet formability/numerical simulation分类
矿业与冶金引用本文复制引用
耿聪,张柳鑫,邓偲瀛..600MPa级车轮用高强钢的成形性能评价研究[J].重型机械,2024,(3):70-75,6.
