| 注册
首页|期刊导航|机械制造与自动化|基于X射线无损探伤的输电线路耐张线夹缺陷检测

基于X射线无损探伤的输电线路耐张线夹缺陷检测

彭放 刘甜甜 苏江文 任俊达 卢伟龙

机械制造与自动化2024,Vol.53Issue(4):264-270,7.
机械制造与自动化2024,Vol.53Issue(4):264-270,7.DOI:10.19344/j.cnki.issn1671-5276.2024.04.051

基于X射线无损探伤的输电线路耐张线夹缺陷检测

Defect Detection of Transmission Line Tensile Clamps Based on X-ray Non-destructive Inspection

彭放 1刘甜甜 1苏江文 2任俊达 1卢伟龙2

作者信息

  • 1. 国家电网有限公司大数据中心,北京 100053
  • 2. 福建亿榕信息技术有限公司,福建 福州 350003
  • 折叠

摘要

Abstract

To improve the poor image clarity,low error detection and workload reduction rates in detecting the defects of strain clamp of transmission line by current method,a new method for detecting the defects of the tension clamp of transmission lines based on X-ray non-destructive testing is proposed.The X-ray non-destructive testing technology is used to obtain the image of the tension clamp of the transmission line,which is enhanced by combining the Retinex image enhancement algorithm with the empirical mode decomposition method.In order to eliminate the effect of X-ray strength on testing results,the image of tension clamp is processed by the adaptive on-state filtering method,the edge of the image is gained with the edge extraction method of Canny operator,the largest connected domain is obtained on the basis of morphological calculation,and the length-to-width ratio of connected domain and circularity are treated as the defect features to complete the detection of the strain clamp defect of the transmission line.The experimental results show that the proposed method has good image clarity,high error detection and workload reduction rates.

关键词

X射线无损探伤/输电线路/图像增强/边缘检测/耐张线夹缺陷检测

Key words

X-ray non-destructive inspection/transmission line/image enhancement/edge detection/defect detection of tensile clamp

分类

信息技术与安全科学

引用本文复制引用

彭放,刘甜甜,苏江文,任俊达,卢伟龙..基于X射线无损探伤的输电线路耐张线夹缺陷检测[J].机械制造与自动化,2024,53(4):264-270,7.

基金项目

国家电网有限公司大数据中心科技项目(SGSJ0000FXJS2100093) (SGSJ0000FXJS2100093)

机械制造与自动化

OACSTPCD

1671-5276

访问量0
|
下载量0
段落导航相关论文