轻工机械2024，Vol.42Issue(4)：43-49,7.DOI:10.3969/j.issn.1005-2895.2024.04.006
基于混合3D打印技术的人体监测用嵌入式应变传感器
Embedded Strain Sensors for Human Monitoring Based on Hybrid 3D Printing Technology
摘要
Abstract
To improve the efficiency of the embedded sensor and structure integration process,a strategy from sensor embedded design to hybrid 3D printing was proposed for the rapid fabrication of sensing-integrated structures.The hybrid 3D printing technology combining fused deposition modeling(FDM)and direct ink writing(DIW)was used to print embedded strain sensors.The strain measured by the sensor in the test was compared with the strain calculated by the finite element method.The results show that the strain measured by the the printed embedded strain sensors is in good agreement with the strains calculated by the finite element method,which proves the effectiveness and high efficiency of the proposed hybrid 3D printing technology.The hybrid printing technology provides a more efficient and low cost method for the sensor-structure integration process.关键词
混合3D打印技术/应变传感器/传感集成结构/有限元分析/结构集成工艺Key words
hybrid 3D printing technology/strain sensor/sensor-integrated structure/FEA(Finite Element Analysis)/structure integration process分类
信息技术与安全科学引用本文复制引用
刘涛,于培师,陶银,刘国涛,赵军华..基于混合3D打印技术的人体监测用嵌入式应变传感器[J].轻工机械,2024,42(4):43-49,7.基金项目
机械结构力学及控制国家重点实验室开放课题资助(MCMS-E-0422G04) （MCMS-E-0422G04）
纳智能材料器件教育部重点实验室开放课题基金资助项目(NJ202003(INMD-2021M05)). （NJ202003(INMD-2021M05）
