西南石油大学学报（自然科学版）2024，Vol.46Issue(4)：107-114,8.DOI:10.11885/j.issn.1674-5086.2024.02.21.03
深层油藏传热模型及油柱高度计算
Heat Transfer Model of Deep Reservoir and Calculation of Oil Column Height
刘勇 1袁晓满 1卢忠沅 1叶思杰 1李晓龙1
作者信息
- 1. 中国石油塔里木油田公司哈得采油气管理区,新疆库尔勒 841000
- 折叠
摘要
Abstract
Deep oil reservoir is characteristic of deep buried depth and large thickness,and is hard to drill through the oil formation.To address the issue of oil column height calculation for deep oil reservoirs,we established a heat transfer model of deep reservoir by considering the vertical heat transfer process from the oil-water interface to the wellbore after well production.We solved the model using variable substitution,variable separation and Fourier transform,and then derived the calculation formula of oil column height.By only using the temperature data at the bottom hole before and after well production,we can calculate oil column height.A pilot test was carried out at an oil well of a deep reservoir located at Tarim Basin to demonstrate the calculation process of oil column height.At the same time,by substituting the testing well data into the heat transfer model,we simulated the values of formation temperature and temperature gradient at different location of the oil formation at different production time.Then,we plotted the temperature distribution curve for different production time and the dynamic temperature curve for different formation location.The simulation results showed that formation temperature distribution took on nonlinear dynamic variation characteristics.The established heat transfer model is a good tool to calculate oil column height for deep oil reservoirs.关键词
深层油藏/油柱高度/传热模型/温度分布/温度梯度Key words
deep reservoir/oil column height/heat transfer model/temperature distribution/temperature gradient分类
能源科技引用本文复制引用
刘勇,袁晓满,卢忠沅,叶思杰,李晓龙..深层油藏传热模型及油柱高度计算[J].西南石油大学学报（自然科学版）,2024,46(4):107-114,8.
